3/3 Tool Trays

• tool tray made from high-resistance foam
• height of the insert without tools: 32 mm
• suitable for all BGS workshop trolleys

scope of delivery:

• 1 circlip pliers | straight | for inside circlips | 175 mm (BGS 447-2)
• 1 circlip pliers | straight | for outside circlips | 175 mm (BGS 447-3)
• 1 circlip pliers | angled | for inside circlips | 175 mm (BGS 447-4)
• 1 circlip pliers | angled | for outside circlips | 175 mm (BGS 447-1)
• 1 swedish type diagonal side cutter | 165 mm (BGS 393)
• 1 long nose pliers | straight | 200 mm (BGS 389)
• 1 bent nose pliers | 200 mm (BGS 373)
• 1 combination pliers (BGS 370)
• 1 water pump pliers | box-joint type | 240 mm (BGS 75111)
• 1 machinist's hammer | fibreglas shaft | DIN 1041 | 500 g (BGS 3854)
• 1 locking grip pliers | with vinyl release lever | 250 mm (BGS 4491)
• 1 pin punch | 150 mm | 3 mm (BGS 1651-3)
• 1 pin punch | 150 mm | 4 mm (BGS 1651-4)
• 1 pin punch | 150 mm | 5 mm (BGS 1651-5)
• 1 pin punch | 150 mm | 6 mm (BGS 1651-6)
• 1 pin punch | 150 mm | 7 mm (BGS 1651-7)
• 1 pin punch | 150 mm | 8 mm (BGS 1651-8)

Technical data:

screwdrivers with T-handle and side blade in the following sizes:

• length 100 mm, T-Star (for Torx) T10
• length 115 mm, T-Star (for Torx) T15
• length 120 mm, T-Star (for Torx) T20
• length 130 mm, T-Star (for Torx) T25
• length 140 mm, T-Star (for Torx) T27
• length 150 mm, T-Star (for Torx) T30
• length 160 mm, T-Star (for Torx) T40
• length 175 mm, T-Star (for Torx) T45
• length 200 mm, T-Star (for Torx) T50
• length 90 mm, 2 mm internal hexagon
• length 100 mm, 2.5 mm internal hexagon
• length 115 mm, 3 mm internal hexagon
• length 120 mm, 4 mm internal hexagon
• length 140 mm, 5 mm internal hexagon
• length 160 mm, 6 mm internal hexagon
• length 170 mm, 7 mm internal hexagon
• length 175 mm, 8 mm internal hexagon
• length 200 mm, 10 mm internal hexagon
• height of the insert without tools 32 mm

Technical data:

• tool tray made from high-resistance foam
• suitable for all BGS workshop trolleys
• suitable for BGS 4010

Technical data:

scope of delivery:

• circlip pliers, straight, for outside circlips, 180 mm
• circlip pliers, bent, for outside circlips, 180 mm
• circlip pliers, straight, for inside circlips, 180 mm
• circlip pliers, bent, for inside circlips,180 mm
• VDE combination pliers, 180 mm
• VDE long nose pliers, 200 mm
• VDE long nose pliers, angled, 200 mm
• VDE diagonal cutter,160 mm
• VDE water pump pliers, 250 mm
• machinist’s hammer, hickory handle, DIN 1041, 500 g
• locking pliers with vinyl grip release lever, 250 mm
• 6 pin punches, 150 mm, sizes: 3 - 4 - 5 - 6 - 7 - 8 mm

• height of the insert without tools: 32 mm

Technical data:

• tool tray made from high-resistance foam
• dimensions: 567 x 408 x 32 mm
• suitable for all BGS workshop trolleys
• suitable for BGS 4011

Technical data:

• cold forged
• offset ring ends
• combination spanners: 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 - 24 - 27 - 30 - 32 mm
• E-type spanner E6 x E8 - E10 x E12 - E14 x E18 - E20 x E24

Technical data:

• tool tray made from high-resistance foam
• suitable for all BGS workshop trolleys
• suitable for BGS 4012

Technical data:

• ergonomically designed T-handles
• T-handles sockets, 6-point Pro torque, length: 230 mm, 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 mm

Technical data:

• tool tray made from high-resistance foam
• dimensions: 567 x 408 x 32 mm
• suitable for all BGS workshop trolleys
• suitable for BGS 4013

Technical data:

• cross slot, slot and T-Star (for Torx) screwdrivers
• cross and plain slotted screw drivers with additional square reception in handle

includes the following tools:

• screwdriver, 100 mm, cross slot PH: PH0 - PH2
• screwdriver, 75 mm, cross slot PH1
• screwdriver, 38 mm, cross slot PH2
• screwdriver, 150 mm, cross slot PH3
• screwdriver, 200 mm, cross slot PH4
• screwdriver, 100 mm, slot SL 3 mm - 6 mm
• screwdriver, 75 mm, slot SL 5 mm
• screwdriver, 38 mm, slot SL 6 mm
• screwdriver, 150 mm, slot SL 8 mm
• screwdriver, 200 mm, slot SL 10 mm
• screwdriver, 80 mm, T-Star (for Torx): T6 - T7 - T8 - T9 - T10
• screwdriver, 100 mm, T-Star (for Torx): T15 - T20 - T25 - T27 - T30
• screwdriver, 150 mm, T-Star (for Torx): T40
• height of the insert without tools: 32 mm

Technical data:

• tool tray made from high-resistance foam
• suitable for all BGS workshop trolleys
• suitable for BGS 4014

Technical data:

• reversible ratchets, fine 72 tooth, quick-release button, anti-slip 2-component handles, 6.3 mm (1/4") - 10 mm (3/8") - 12.5 mm (1/2")
• Pro Torque® sockets, 6.3 mm (1/4") drive: 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 mm
• Pro Torque® sockets, 10 mm (3/8") drive: 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 mm
• Pro Torque® sockets, 12.5 mm (1/2") drive: 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 24 - 27 - 30 - 32 mm
• Pro Torque® deep sockets, 6.3 mm (1/4") drive: 4 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 mm
• Pro Torque® deep sockets, 10 mm (3/8") drive: sizes: 8 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 mm
• Pro Torque® deep sockets, 12.5 mm (1/2") drive: 10 - 13 - 15 - 16 - 17 - 18 - 19 - 22 - 24 mm
• Extension bar external, 6.3 mm (1/4") drive, length: 75 mm
• Extension bar external, 10 mm (3/8") drive, length: 150 mm
• Extension bar external, 12.5 mm (1/2") drive, length: 125 mm
• Universal joint external/internal square: 6.3 mm (1/4") - 10 mm (3/8") - 12.5 mm (1/2")

Technical data:

• tool tray made from high-resistance foam
• suitable for all BGS workshop trolleys
• suitable for BGS 4015

Technical data:

• cold forged
• offset ring end

includes the following tools:

• double open end spanners: 6 x 7 - 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 17 - 18 x 19 - 20 x 22 mm
• double ring spanners, deep offset ends: 6 x 7 - 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 17 - 18 x 19 - 20 x 22 mm
• ratchet ring spanners, stubby type, reversible, fine 72-tooth: 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 mm

Technical data:

• tool tray made from high-resistance foam
• suitable for all BGS workshop trolleys
• suitable for BGS 4016

Technical data:

includes the following tools:

Bits 8 mm (5/16"), length 30 mm:

• slot: 8 - 10 - 12 mm
• cross slot PH: PH3 - PH4
• cross slot PZ: PZ3 - PZ4
• T-Star (for Torx): T40 - T45 - T50 - T55 - T60 - T70
• T-Star tamperproof (for Torx): T40 - T45 - T50 - T55 - T60 - T70
• internal hexagon: 7 - 8 - 10 - 12 - 14 mm
• bit adaptor hexagon 6.3 mm (1/4) to hexagon 8 mm (5/16")

Bit Sockets, 6.3 mm (1/4") drive, length 35 mm:

• slot: 4 - 5.5 - 6.5 - 7 mm
• cross slot PH: PH0 - PH1 - PH2 - PH3
• Cross slot PZ: PZ0 - PZ1 - PZ2 - PZ3
• T-Star (for Torx): T8 - T9 - T10 - T15 - T20 - T25 - T27 - T30 - T40
• T-Star tamperproof (for Torx): T8 - T9 - T10 - T15 - T20 - T25 - T27 - T30 - T40
• Spline (for XZN): M8 - M10 - M12
• internal hexagon: 3 - 4 - 5 - 6 - 7 - 8 mm
• TS-Star: TS10 - TS15 - TS20 - TS25 - TS27 - TS30 - TS40 - TS45 - TS50

Bit Sockets, drive 12.5 mm (1/2") drive:

• length 55 mm, internal hexagon: 14 - 17 - 19 - 22 - 24 mm
• length 140 mm, internal hexagon: 10 - 11 - 13 mm
• length 140 mm, Spline (for XZN): M10 - M12 - M14
• length 240 mm, Spline (for Ribe): R7 -R8
• length 140 mm, T-Star (for Torx): T40 - T45 - T50 - T55 - T60 - T70

Special Sizes, 12.5 mm (1/2") drive

• Spline (for XZN) M9 x 100 mm - M16 x 100 mm
• Spline tamperproof (for XZN) M16 x 53 mm
• impact bit socket spline (for XZN) M18 x 78 mm
• T-Star (for Torx) T80 x 100 mm - T30 x 300 mm
• internal hexagon 7 x 230 mm
• inner hexagon ball point, 5 x 160 mm
• Spline (for Ribe) R9 x 100 mm - R10 x 140 mm

• height of the insert without tools: 32 mm

Technical data:

• tool tray made from high-resistance foam
• suitable for all BGS workshop trolleys
• suitable for BGS 4017

Technical data:

• sockets hexagon, 12.5 mm (1/2"): 3/8" - 7/16" - 15/32" - 1/2" - 9/16" - 19/32" - 5/8" - 21/32" - 11/16" - 3/4" - 25/32" - 13/16" - 7/8" - 15/16" - 1.1/16" - 1.3/16" - 1.1/4"
• sockets hexagon, deep, 10 mm (3/8"): 5/16" - 3/8" - 7/16" - 15/32" - 1/2" - 9/16" - 19/32" - 5/8" - 11/16" - 3/4"
• sockets hexagon, 10 mm (3/8"): 3/8" - 7/16" - 15/32" - 1/2" - 9/16" - 19/32" - 5/8" - 11/16" - 3/4"
• sockets hexagon, deep, 6.3 mm (1/4"): 5/32" - 7/32" - 1/4" - 9/32" - 5/16" - 11/32" - 3/8" - 7/16" - 15/32" - 1/2"
• sockets hexagon, 6.3 mm (1/4"): 5/32" - 3/16" - 7/32" - 1/4" - 9/32" - 5/16" - 11/32" - 3/8" - 7/16" - 15/32" - 1/2" - 9/16"
• bit sockets, 10 mm (3/8"), internal hexagon: 1/8" - 5/32" - 3/16" - 1/4" - 9/32" - 5/16" - 3/8"
• bit sockets, 6.3 mm (1/4"), internal hexagon: 3/32" - 1/8" - 5/32" - 3/16" - 7/32" - 1/4" - 9/32" - 5/16" - 3/8"
• combination spanners: 1/4" - 5/16" - 3/8" - 7/16" - 1/2" - 9/16" - 5/8"
• internal hexagon L-type keys, long side with ball point: 1/16" - 5/64" - 3/32" - 1/8" - 5/32" - 3/16" - 5/16" - 3/8"

Technical data:

• tool tray made from high-resistance foam
• suitable for all BGS workshop trolleys
• suitable for BGS 4020

Technical data:

• tool tray made from high-resistance foam
• dimensions: 567 x 408 x 32 mm
• suitable for all BGS workshop trolleys
• suitable for BGS 4033

Technical data:

• trim strip set, manufactured from high end special plastic, various shapes for working on trim strips, rubber gaskets, interiors, door trims, switches, etc.
• hook set is needed for laying of cables, stuffing seats, etc., all hooks with 2-component handles
• trim strip wedge, made from plastic, for damage-free removal of trim strips: 100 x 45 mm - 185 x 25 mm
• door trim removing tool for removal of trim strips on car body, can be used for nearly all brands
• assembly wedge assortment made from special hard plastic / nylon, for working on car interior lining, cover panel, dashboard, trim strips

includes the following tools:

• trim strip wedge, length: 160 - 200 mm
• piercer, straight
• hook 90° angled
• hook with round head
• double angled hook
• trim strip wedges made of plastic: 100 x 45 mm - 185 x 25 mm
• windshield moulding release tool
• assembly wedge assortment

• height of the insert without tools: 32 mm

Technical data:

• tool tray made from high-resistance foam
• dimensions: 567 x 408 x 32 mm
• suitable for all BGS workshop trolleys
• suitable for BGS 4034

Technical data:

• 4 plastic scrapers: 19 - 22 - 25 - 38 mm
• 1 pliers for wheel balancing weights
• 1 thread retapper for tire valves
• 1 special socket for steel tire valves, 6.3 mm (1/4") drive
• 4 protective impact sockets with plastic sleeves, 12.5 mm (1/2") drive: 15 - 17 - 19 - 21 mm
• 2 valve core torque tools: 0.25 - 0.45 Nm
• 2 tire valve insert tools
• 1 tire valve replacing tool, flexible
• 1 workshop torque wrench, 40 - 200 nm, 12.5 mm (1/2") drive, ratcheting head, reversible, 48 teeth, accuracy: +- 4%, incl. test certificate
• 1 tire lever with plastic protection cover, 500 mm

Technical data:

• tool tray made from high-resistance foam
• dimensions: 567 x 408 x 32 mm
• suitable for all BGS workshop trolleys
• suitable for BGS 4035

Technical data:

• Sockets in hexagon Pro torque® design
• fine-toothed ratchet, 72 teeth
• height of the insert without tools: 32 mm

with 6.3 mm (1/4") drive:

• reversible ratchet, sliding bar, handle 150 mm
• extension bar 50 and 100 mm, universal joint
• 13 sockets: 4 - 14 mm
• 7 deep sockets: 4 - 10 mm
• 5 E-type sockets: E4 - E8
• 1 bit holder for 6.3 mm (1/4") bits
• 3 cross slot bit sockets: PH0 - PH1 - PH2
• 3 PZ cross slot bit sockets: PZ0 - PZ1 - PZ2
• 4 slotted bit sockets: 4 - 7 mm
• 4 internal hexagon bit sockets: 3 - 6 mm
• 8 T-Star bit sockets (for Torx): T8 - T30
• 8 bit sockets, T-Star tamperproof (for Torx): T8 - T30

with 10 mm (3/8") drive:

• reversible ratchet
• extension bar 125 mm, universal joint
• 1 glow plug socket 18 mm
• 10 sockets: 10 - 19 mm
• 6 deep sockets: 10 - 15 mm
• 5 E-type sockets: E10 - E16
• 1 bit holder for 8 mm bits

with 12.5 mm (1/2") drive:

• reversible ratchet
• extension bar 125 and 250 mm, universal joint, 1 sliding bar adaptor for 12.5 mm (1/2") extension bar
• 1 bit holder for 8 mm bits
• 2 glow plug sockets: 16 mm - 21 mm
• 17 sockets: 10 - 32 mm
• 5 deep sockets: 16 - 22 mm
• 3 E-type sockets: E18 - E20 - E24

bits with 8 mm drive:

• 3 slot: SL 8 - 10 - 12 mm
• 4 cross slot: PH3 - PH4 - PZ3 - PZ4
• 5 internal hexagon: 7 - 8 - 10 - 12 - 14 mm
• 6 T-Star (for Torx): T40 - T70
• 6 T-Star tamperproof (for Torx): T40 - T70

bits with 6.3 mm (1/4") drive

• 10 T-Star (for Torx): T5 - T40
• 8 T-Star tamperproof (for Torx): T7 - T40
• 5 spline (for Ribe): M5 - M9
• 3 spline (for XZN): M5 - M6 - M8
• 8 TS-Star (for Torx Plus): TS10 - TS45
• 2 cross slot: PH3 - PH4
• 2 cross slots PZ3 - PZ4
• 2 internal hexagon: H2 - H2.5
• 7 internal hexagon L-type keys: 1 - 5 mm

Technical data:

• tool tray made from high-resistance foam
• dimensions: 567 x 408 x 32 mm
• suitable for all BGS workshop trolleys
• suitable for BGS 4036

Technical data:

• machinist's hammer, black lacquered head, fibreglass shaft, 300 g
• L-type keys, extra long model, in folding holder, T-Star (for Torx): T10 - T15 - T20 - T25 - T27 - T30 - T40 - T45 - T50
• L-type keys, extra long model, in folding holder, internal hexagon, long side with ball head: 1.5 - 2.0 - 2.5 - 3.0 - 4.0 - 5.0 - 6.0 - 8.0 - 10 mm
• cotter pin drive, 150 mm, hardened, lacquered shaft: 3 - 4 - 5 - 6 - 7 - 8 mm
• centre punch, 120 mm, hardened, lacquered shaft: 5 x 12 mm
• workshop screwdriver, 2-component handles, slot drive: 3 x 60 mm - 4 x 80 mm - 5.5 x 125 mm - 6.5 x 150 mm
• workshop screwdriver, 2-component handles, cross slot PH: PH1 x 80 mm - PH2 x 100 mm - PH3 x 150 mm
• long nose pliers, straight, 200 mm / side cutter, 165 mm
  • with strong 2 component hand protection insulation
• waterpump pliers with box-joint, 240 mm
  
  • safety handles
  • forged, hardened
  • painted black
  • polished jaws and joint
  • Handle dip insulated
  • aperture max. 38 mm

Technical data:

• tool tray made from high-resistance foam
• suitable for all BGS workshop trolleys
• suitable for BGS 4038

Technical data:

• cold forged
• offset ring end

includes the following tools:

• 8 double open end spanners: 6 x 7 - 8 x 9 -  10 x 11 -  12 x 13 - 14 x 15 - 16 x 17 - 18 x 19 - 20 x 22 mm
• 17 combination spanners: 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 22 - 24 - 27 mm
• 10 double ring spanners, deep offset ends: 6 x 7 - 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 17 - 18 x 19 - 20 x 22 - 21 x 23 - 24 x 27 mm

• height of the insert without tools: 32 mm

Technical data:

• tool tray made from high-resistance foam
• suitable for all BGS workshop trolleys
• suitable for BGS 4089

Technical data:

• for checking and adjusting the engine timing

suitable for the following models:

• Renault: Clio 1-2-3-4, Clio Sport 1-2-3, Mégane 1-2-3, Master 1-2, Mégane Scénic 1-2-3, Vel Satis 1-2, Avantime, Kangoo 1-2-3, Laguna 1-2-3, Espace 1-2-3, Trafic 1-2, Wind, Modus, Twingo, Koleos
• Dacia: Logan, Duster, Sandero, Dokker
• Nissan: Note, Qashqai, Micra, Interstar, Primastar, Kubistar, Almera, Primera
• Opel: Vivaro, Movano
• Volvo: S 40, V 40

suitable for gasoline and diesel engines:

• 1.2 - 1.2 16V - 1.4 - 1.4 16V - 1.5DCI - 1.6 - 1.6 16V, 1.6D - 1.7 - 1.8 - 1.8 16V - 1.9TD - 1.9 - 1.9DCI, 1.9DTI - 1.9CDTI - 2.0 - 2.0 16V - 2.1TD - 2.2, 2.2DCI - 2.2DTI - 2.2TD - 2.5DCI - 2.5CDTI - 2.5TD - 2.8D
• engine codes:
  D4F 702 / 706 / 708 / 712 / 714 / 716 / 722 / 728 / 730 / 740 / 764
  D7F 700 / 701 / 710 / 720 / 722 / 726 / 730 / 744 / 746 / 764 / 766
  E7F 700 / 704 / 706 / 750
  E7J 601 / 624 / 626 / 634 / 635 / 680 / 700 / 706 / 710 / 711 / 716
  718 / 719 / 720 / 724 / 726 / 728 / 740 / 742 / 745 / 754 / 756 / 757
  764 / 770 / 771 / 773 / 780
  F3P 670 / 682 / 700 / 704 / 706 / 708 / 710 / 712 / 714 / 720 / 724 / 755 / 758 / 760
  F7P 704 / 722
  F3R 611 / 722 / 723 / 728 / 729 / 750 / 751 / 752 / 791 / 796 / 797 / 798
  F5R 700 / 701 / 740
  J7R 732 / 733 / 734 / 735 / 768
  F7R 710 / 714
  J7T 600 / 760 / 761 / 762 / 766 / 772 / 780 / 782
  N7Q 704 / 710 / 711
  N7U 700 / 701
  K4J 700 / 710 / 711 / 712 / 713 / 714 / 715 / 730 / 732 / 740 / 750 / 770 / 780
  K4M 700 / 701 / 704 / 706 / 707 / 708 / 709 / 710 / 711 / 712 / 714 / 716 / 718 / 720 / 724 / 730 / 732 / 734 / 736 / 740 / 742 / 743 / 744 / 745 / 746 / 748 / 750 / 752 / 753 / 754 / 760 / 761 / 762 / 764 / 765 / 766 / 768 / 776 / 782 / 788 / 790 / 791 / 794 / 800 / 801 / 802 / 804 / 812 / 813 / 830
  K9K 700 / 702 / 704 / 706 / 710 / 712 / 714 / 716 / 718 / 722 / 724 / 728 / 729 / 732 / 734 / 740 / 750 / 752 / 760 / 762 / 764 / 766 / 768 / 802 / 804 / 806
  F9Q 610 / 650 / 664 / 670 / 674 / 71 / 716 / 717 / 718 / 720 / 722 / 730 / 731 / 732 / 733 / 734 / 736 / 738 / 740 / 744 / 748 / 750 / 752 / 754 / 758 / 759 / 760 / 768 / 762 / 770 / 772 / 774 / 780 / 782 / 784 / 786 / 788 / 790 / 796 / 800 / 803 / 804 / 808 / 812 / 816 / 818 / 820
  G9T 600 / 605 / 700 / 702 / 703 / 706 / 707 / 710 / 712 / 720 / 722 / 742 / 743 / 750
  G9U 720 / 724 / 726 / 730 / 750 / 754
  F8M 736 / 760
  F8Q 600 / 610 / 606 / 620 / 622 / 624 / 630 / 632 / 640 / 644 / 646 / 648 / 662 / 672 / 678 / 680 / 682 / 684 / 692 / 696 / 706 / 714 / 720 / 722 / 730 / 732 / 740 / 742 / 744 / 764 / 768 / 706 / 776 / 784 / 786 / 788
  J8S 620 / 621 / 622 / 758 / 760 / 776 / 778
  G8T 714 / 716 / 740 / 752 / 760 / 790 / 792 / 794
  S8U 720 / 722 / 730 / 731 / 742 / 748 / 750 / 752 / 770 / 772 / 780 / 782
  S9U 700 / 702 / 704 / 714 / 740
  S9W 700 / 702 / 206 / 208 / 212
  E5F, E6J, K7M, F4P/F4R, F1N, F2N, F3N, F2R, F3P, F4P, F3R, J5T, J6R, J7R

scope of delivery:

• camshaft locking tools, to be used as OEM MOT 1496, MOT 1750, MOT 1337, MOT 1534, KM-6205, MOT 1537, KM-6204
• camshaft gear adjusting tool, to be used as OEM MOT 1490-01
• crankshaft locking pins, to be used as OEM MOT 1054, KM-6031, KV113 B0280, MOT 1489, KV113 B0130, MOT 1340, MOT 910, MOT 1318, MOT 1489, MOT 1337, MOT 1536, KM-6203, MOT 1054
• tensioning tools, to be used as OEM MOT 1348, MOT 1312, MOT 1384, MOT 1135-01, MOT 1543, KM-6234, KV113 B0360, MOT 1386
• screw M6 x 45 mm
• screw M8 x 80 mm
• high pressure injection pump locking pins, to be used as OEM MOT 1538, MOT 1200-01

Technical data:

• for adjusting the engine timing when renewing the tooth belt, replacing the cylinder head gasket, etc.

suitable for the following models:

• Fiat Ulysse, Scudo, Ducato
• Lancia Zeta, Phedra
• Ford Fiesta, Fusion, Focus, Focus C-Max
• Citroen C15, C1, C2, C3 Pluriel, C4, C4 Picasso, C5, C6, C8, DS3, DS4, DS5, Xantia, Xsara, Xsara Picasso, Evasion, Berlingo, Jumpy, Jumper, Saxo, ZX, XM, Evasion, AX
• Peugeot 107, 1007, 206 cc, 207, 208, 306, 307 cc, 308, 406, 407, 508, 607, 806, 807, Partner, Expert, Boxer, 206, 106, 605, 205, 405
• Lancia / Fiat 2.0 & 2.2 JTD

suitable for engines:

• DW12TED4 (4HW), DW10ATED (RHT/RHV/RHW/RHX/RHZ)
• Ford 1.4 / 1.6 Duratorq TDCI
  Motorcodes: F6JA, F6JB, F6JC, G8DA, G8DB, HHDA, HHDB, HHJA, HHJB
• Citroen / Peugeot 1.0 / 1.1 / 1.4 / 1.6 / 1.6 16V, 1.4 / 1.6HDI / 1.8 / 1.8 16V / 2.0 / 2.0 Turbo, 1.9D / 2.0HDI / 2.2HDI / 1.8 16V / 2.0 16V
• engince codes:
  TU9 (CDY/CDZ), TU1 (HDY/HDZ/HFX/HFY/HFZ), TU3 (KDX/KDY/KDZ/KFX/KFZ),
  TU5JP4 (NFU/NFX), TU5 (BDY/BFZ/NFT/NFV/NFW/NFY/NFZ), XU7 (LFW/LFX/LFZ),
  EW7J4 (RLZ), XU7JP4 (LGY), XU10 (RFL/RFU/RFW/RFX/RGX/RGY), XU10JP4(RGX/RGY),
  EW10A (RFJ), EW10J4S (RFK), EW10D (RLZ), EW12J4 (3FZ), ET3JE (KFU), TU3A/JP (KFV/KFW),
  DV4TD (8HW/8HX/8HZ), DV4TED4 (8HV/8HY), DV6ATED4 (9HX/9HY/9HZ), EW10-CVI (RLZ),
  EW12 (3FZ), DW8 (WJZ/WJY), DW10 (RHY/RHV/RHZ/RHS/RHM/RHW/RHT/RHR/RHX), DW12 (4HX/4HZ/4HW/4HY), EW7J4 (6FZ),
  EW10J4 (RFR), EW10J4D (RLZ)

scope of delivery:

• flywheel puller, to be used as OEM 0188-P2, 0188-P, 174, 7015-T
• tensioner pulley locking levers, to be used as OEM 0188-J1, 0188-J2
• tensioner pulley locking pins, to be used as OEM 0188-Q2, 0188-AH, 0189-S2
• timing belt retaining clip, to be used as OEM 0132-AK, 0188-AK, 0189-K, 0153-AK, 4533-TAD, MOT 1436
• flywheel locking pins, to be used as OEM 0153-N, 0188-Y, 7014-TJ, 7099-TM, 9797-34,
  0188-D, 7017-TM, 0132-P, 4507-TL, 7017-TR, 0153-M, 0178-C, 0178-D, 7014-TM, 9767-94, 0189-B, 21-163, 0132-AJ1, 0153-G, 0188-M, 0189-J, 4533-TAC1, 5711-TA, 0189-L, 0189-C, 0189-R, 0153-U, 7019-T, 0132-Q, 0132-QZ, 4507-TA, 9767-27, 0132-X, 0188-Q1, 4507-TJ, 9767-89
• tensioner pulley locking pins, to be used as OEM 4200-TH, 0117-AR
• tensioning tool, to be used as OEM 0178-E
• flywheel locking tool, to be used as OEM 0153-A, 6012-T, 9765-54, 0134-AF, 0134-Q, 0188-F, 9004-T
• pulley locking lever, to be used as OEM 0606-A1-A2
• tensioner pulley adjusting tool, to be used as OEM 0189-S1

Technical data:

• for checking and adjusting the engine timing 

suitable for the following models:

• Audi 80, A1, A2, A3, S3, A4, A5, A6, TT, Q5
• Seat Arosa, Ibiza, Cordoba, Leon, Toledo, Alhambra, Altea, Inca (99-04)
• Skoda Fabia, Octavia, Superb
• VW Lupo, Polo, Fox, Golf, Bora, Jetta, Golf Plus, Passat, Beetle, Touran, Sharan, Caddy, Caddy Maxi, Transporter, Golf VI Cabrio, Tiguan
• Ford Galaxy

petrol engines:

• 1.2 TSI / 1.4 / 1.4 TSI / 1.6 16V / 1.2 9V-12V 3-Zyl., 1.4 / 1.6 FSi (camshaft timing chain), 1.8 / 1.8 16V / 1.8T / 2.0 16V / 2.0 FSI / TFSI (timing belt)

diesel engines:

• 1.2 / 1.4 / 1.9 / 2.0 TDI PD, 1.9 TDI 75-90-110, 1.9 SDI 75-90-110, 1.9 TDI 105-130-150, 2.0 TDI DPF 140-170, 2.5 TDI V6

engine codes:

• ARC, ATN, AUS, AVY, AZD, AFH, BCA, AJV, AKQ, AUA, AUB,
  AXP, AFH, AFN, AFK, AHW, AHU, APE, AQQ, AUS, AXP, AZD, BBY, BBZ,
  BCB, ANY, AYZ, AMF, ATL, BAY, BHC, BMS, BNM, BNV, BWB, AJM, AMG,
  ANU, ARL, ASZ, ATD, ATJ, AUY, AVB, AVF, AVQ, AWX, AXB, AXC, AXR, BEW,
  BJB, BKC, BKE, BLS, BLT, BMT, BPX, BRB, BRM, BRR, BRS, BRU, BSU,
  BSW, BTB, BUK, BVK, BXE, BXF, AZV, BDJ, BDK,BGW, BHW, BKD, BKP,
  BLB, BMA, BMM, BMN, BMP, BMR, BNA, BPW, BRC, BRE, BRF, BRT, BUZ,
  BVF,BVG,BVH,BWK,BTS,BMY,BLF, BWV, AZV, BKD, AWY, AZQ, AXU, BAG,
  BKG, BLF, BLN, BLP, BFV, BKF, BNU, BVP, BVR, 1Z,CBZA, CBZC, CBZB,
  CAXA, CAGA, CAGB, CAGC, CAHA, CAYA, CAYB. CAYC, CBAA, CBAB, CBAC,
  CBBA, CBBB, CBDA, CBDB, CBDC, CBEA, CEGA. AZV, BDJ, BHP, BKD, BLB,
  BMA, BMM BMN, BMP, BMR, BNA, BPW, BRC, BRE, BRF, BRT, BSS, BUY, BUZ,
  BVA, BVE, BVF, BVG, BVH, BWV, ACV, ACV, AFB, AGX, AHD, AHY, AHY, AJT, AJT,
  AKE, ANJ, APA, AUF, AXG, AXG, AXL, AXL, AYC, AYC, AYM, AYY, BAU, BBE, BBF,
  BCZ, BDG, BDH, BFC, BJJ, BJK, BJL, BJM

scope of delivery:

• camshaft locking & adjusting tools, to be used as OEM 3458, T30094, T10016, T10074, T10074, MP1-1312, T10098, T20038, 3418, T10123, T10121, T10120, T10252, T10171, 2065-A, 21-105
• crankshaft locking & adjusting tools, to be used as OEM 3242, T40069, T30052, T40026, T10414, T10100, T10340, T10341
• injection pump locking & adjusting tools, to be used as OEM 3359, T20102, 2064, U20003
• chain tensioner, tooth belt tensioner & drive belt tensioner tools, to be used as OEM 23-058, 310-084, T10008, 2065A, T10008, U40021, T10092, T40011, T10060, T10060A, T00115, T10264, T40098, 303-1054, T10115, T10092, T40011, T00115, T10264, T40098
• chain tensioner / crankshaft sprocket holder, to be used as OEM 3366, T20018, T20044
• crankshaft sprocket aligning tool, to be used as OEM 23-059, 310-085, T10050
• lever / wrench for tensioning the tooth belt, to be used as OEM 3387, U30009A, 2587, MATRA V.159, 3387, T10020
• locking bracket, to be used as OEM MP1-1312, T10098, T20038
• support guides, to be used as OEM OEM 3369, T30092, 3411
• TDC indicator, to be used as OEM T10170
• dial test indicator, to be used as OEM VAS6079

Technical data:

• for checking and adjusting the engine timing
  

suitable for the following models:

• Alfa Romeo 145 / 146 / 147 / 155 / 156 / 159 / 166 /
• Spider / GTV / TS / GT / Crosswagon Q4
• Fiat Punto / Grande Punto / Brava / Bravo / Marea / Weekend / Stilo / Doblo / Cargo /
  Idea / Panda / Multipla / Palio / Stilo / 500
• Lancia Lybra / Ypsilon / Thesis / Musa
• Opel Corsa / Agila / Meriva / Combo / Vectra / Zara / Astra / Insigna / Signum 1.9 CDTI
• Suzuki Ignis / Swift / Wagon R+
• Ford Ka

engines:

• 1.2 8V / 1.2 16V / 1.4 16V / 1.6 16V / 1.6 MultiJet / 1.9 JTD / 1.9 JTD 16V / 1.9 MultiJet / 1.9 CDTI / 2.0 MultiJet / 2.4 JTD 20V / 2.4 JTD / 1.3 JTD MultiJet / 1.3 CDTI / 1.3 TDCI / 1.9 CDTI
• engine codes:
  843A1.000 / 323.02 / 371.01 / 182B4.000182B9.000
  186A6.000 / 188A2.000 / 188A7.000 / 188B2.000 / 192A1.000
  192A3.000 / 937A2.000 / 939A1.000 / 192A5.000 / 192B1.000
  198A5.000 / 937A5.000 / 939A2.000 / 325.01 / 342.02 / 362.02
  185A6.000 / 841C.000 / 841G.000 / 939A3.000 / 940A3.000
  940A4.000 / 940A5.000 / Z19DT / DTH / DTR / DTJ / DTL
  Z13DT / Z13DTJ / Z13DTH / 169A1.000 / 955A4.000 / 350A3.000
  192B4.000 / 198A2.000 / 350A2.000 / 955A3.000 / 192A8.000
  198A6.000 / 198A3.000 / 199B1.000 / 199B2.000 / 199A2.000
  199A3.000 / 199A9.000 / 188A3.000 / 188A8.000 / 188A9.000
  192A9.000 / 186A8.000 / 186A9.000 / 199A5.000 / 223A7.000
  223A9.000 / 841H.000 / 841P.000 / 185A2.000 / 182A4.000
  182A6.000 / 182B6.000 / 178B3.000 / 186A3.000 / 186A4.000
  350A1.000 / 169A4.000 / 188A4.000  / 199A4.000 / 199A7.000

scope of delivery:

• camshaft locking & adjusting tools, to be used as OEM 1860874000, 1860874000, 1860985000, 1825041000, 1825041000, 1825042000, 1825042000, 1860847000, 1860847000, 2000004300, 1871000900, 2000004400, 2190754400, 1870896900
• crankshaft & flywheel locking tools, to be used as OEM 1860161000, 1860905000, EN-46788, 1860771000, 1860898000, 1860863000, 1870900300, 1860703000, 2190754500, 2000004200, 2190754200, 1860905000, 2000004500, 2190754500
• injection pump adjusting tools, to be used as OEM 1860965000
• tensioning tools, to be used as OEM 1860876000, 1860987000, 1860845000, 1860876000, 1870900400
• TDC indicators, to be used as OEM 1860992000, 1895443000

Technical data:

• for checking and adjusting the engine timing 

suitable for the following models:

• Opel Corsa B/C / Combo / Tigra / Agila /Tigra B / Meriva / Astra F/G/H / Astravan / Speedster VX220 / Zafira A/B / Vectra B/C / Signum / Omega B / Sintra / Frontera A/B / Astravan / Kadett / Ascona / Omega / Monterey / Antara / Croma / Speedster VX220
• Chevrolet & Daewoo Epica / Captiva / Nubira / Lacetti / Evanda
• Saab 9-3 / 9-5 (98-04)
• Alfa 145 / 146 / 147 / 156 / 159 / 166
• GT / Crosswagon Q4
• Fiat Punto / Grande Punto / Bravo / Brava / Marea Weekend / Stilo / Doblò/Cargo / Multipla Idea / Panda
• Lancia Ypsilon / Musa / Lybra / Thesis
• Suzuki Ignis / Swift / Wagon R+
• Ford Ka

engines:

• 1.0 12V / 1.0 16V / 1.2 16V / 1.4 /1.6 / 1.2-1.4 16V (chain) / 2.0 / 2.0 Turbo / 2.2 DI / 2.0-2.2 16V / 1.6 16V / 1.8 16V / 2.0 16V / 2.2 16V / 1.3 JTD MultiJet / 1.3 CDTI / 1.3 TDCI / 1.6 MultiJet / 1.9 JTD / 1.9 MultiJet / 2.4 JTD / 1.9 CDTI / 2.0 MultiJet /1.5 D / 1.5 TD / 1.7 D / 1.7 TD / 1.6-1.7 D / 3.0 TD / 3.1TD / 2.0-2.2-2.4 TD / 2.0-2.2 DI / 2.0 TDCI / 2.0 D VCDI / 2.2 16V (DOHC)
• engine codes:
  X14XE / Z14XE / X16SEJ / X16XE / X16XEL / Y16XE / Z16XE /
  Z16YNG / C18XEL / X18XE / X18XE1 / Z18XE / Z18XEL / C20SEL / C20XE /
  X20XEV / Z20LEH / Z20LEL / Z20LER / Z20LET / X22SE / X22XE / Y22SE /
  Y22XE / Z22XE / D223L /X10XE / Z10XE / Z10XEP / X12XE / Z12XE / Z14XEP /
  X20DTL / X20DTH / X22DTH / Y20DTL / Y20DTH / Y22DTH / Y22DTR /
  169A1.000 / 955A4.000 / 350A3.000 / 192B4.000 / 198A2.000 / 350A2.000 /
  955A3.000 / 192A8.000 / 198A6.000 / 198A3.000 / 199B1.000 / 199B2.000 /
  199A2.000 / 199A3.000 / 199A9.000 / 940A3.000 / 188A3.000 / 939A2.000 /
  188B2.000 / 188A8.000 / 188A9.000 / 323.02 / 371.01 / 937A2.000 /
  182B4.000 / 182B9.000 / 188A2.000 / 188A7.000 / 192A9.000 / 186A6.000 /
  186A8.000 / 192A1.000 / 192A3.000 / 192B1.000 / 192A5.000 / 186A9.000 /
  939A1.000 / 199A5.000 / 223A7.000 / 223A9.000 / 342.02 / 362.02 /
  841G.000 / 841H.000 / 841P.000 / 939A3.000 / 185A2.000 / 185A6.000 /
  Z13DT / Z13DTJ / Z13DTH / Z19DT / Z19DTH / Z19DTJ / Z19DTL  /
  X10XE / Z10XE / Z10XEP / Z12XE / Z14XEP / X16SZR / Z16SE / 4EC1/T / 4EC1 / 4EE1/T / 4EE1 / X17DT / Y17DT / Y17DTi / Y17DTL / 16DA / 17D /
  17DR/X / 7DTL / X17DTL / 4JX1/4 / JG2T /4FC1/T / 4FD1 / X20DTL /
  Y20DTL / D223L Z20DMH / Z20DM / RA420 / Z20S1 /194A1.000 / Z22SE / Z22YH

scope of delivery:

• adjusting wrench, to be used as OEM KM-933
• injection pump locking pin, to be used as OEM KM-927
• flywheel & crankshaft locking tools, to be used as OEM KM-929 / KM-952 / EN-46785 / KM-951 / 1860905000 / 1860905010 / EN-46788 / KM-911 / EN-46785 / 1860703000 / EN-48246 / 1870900300 / 303-1468
• tensioner tools, to be used as OEM KM-955 / KM-6130 / KM-6349 / KM-6349 / 1870900400 / 1871000200

Technical data:

• for checking and adjusting the engine timing 

suitable for the following models:

• Ford Fiesta, Fusion, Courier, Escort, Focus, Focus C Max, Puma, Mondeo, Sierra, Cougar, Galaxy, C-Max, Orion, Tourneo Connect, Transit, Transit Connect
• VW Sharan
• Seat Alhambra
• Mazda 121
• Volvo S40, V50

gasoline engines:

• 1.2 / 1.25 / 1.4 / 1.6 / 1.6 / 1.7 / 1.8 / 2.0 16V / 1.6 TI-VCT / 1.6 SCTI

diesel engines:

• 1.6 Duratorq TDCI / 1.8D / 1.8TD / 1.8 DI (98-04) / 1.8 TDCI (01-04) / 1.6D / 1.9TDI / 2.5D TCI / 1.9TDI / 2.5D/TCI / 1.4TDCI / 1.6TDCI / 1.8D / 1.8TCI / 1.8TDDI / 1.8TDCI / 1.8D Turbo / 1.9TDI PD / 2.0TDCI / 2.2TDCI / 2.5D / 2.5D Turbo / 2.0 / 2.2 / 2.4 Duratorq TDCI 16V / 1.4TDCI / 1.6D 8V / 1.6D 16V

engine codes:

• 1Z / 4BA / 4BB / 4BC / 4CA / 4CB / 4CC / 4DA / 4EA / 4EB / 4EC / 4ED / 4FA / 4FA / 4FB / 4FC / 4FD / 4GA / 4GA / 4GB / 4GC / 4GD / 4GE / 4GF / 4HA / 4HB / 4HC /
  4HD / ABFA / AFN / AFN / AHU / AHU / ANU / ASDA / ASDB / AUY / AVG / AZBA / AZBC / AZWA / AZWC / BHPA / C9DC / D24 / D24T / D24TIC / D2FA / D3FA / D4FA / D5BA /
  D6BA / DHA / DHB / DHC / DHD / DHE / DHF / DHG / DOFA / F3FA / F4FA / F6JA /
  F6JB / F6JC / F6JD / F8JA / F8JB / F9DA/B / FFBA / FFWA / FHA / FHE / FIFA /
  FMBA/B / FUJA / FUJB / FXDA/C / FXDB/D / FXFA / FXJA / FXJB / FXJC / FYDA/C / FYDB/D / FYDH / FYJA / FYJC / FYJB / G6DA / G6DB / G6DC / G6DD / G6DE /
  G6DF / G6DG / G8DA / G8DB / H9FA / H9FB / HCPA / HCPB / HHDA / HHDB / HHJA / HHJC / HHJD / HHJE / HHJF / HJBA/B / HWDA / HWDA1Z / HWDB / HXDA / HXJA /
  HXJB / IQDA/B / IQDB / IXDA / JQDA / JTDA / JTDB / KHBA / KKDA / KKDA / KKDB / KLBA / KLWA / KNBA / L1E / L1G / L1H / L1K / L1T / L1V / LPBA / LQDB / M7JA /
  M7JB / N7BA / N7BB / P7PA / P9PA / P9PB / PNBA / PNDA / Q4BA / QJBA / QJBB /
  QJBC / QJBD / QXBA / QXBB / QXWA / QXWB / QYBA / QYWA / R2PA / R3PA / RDA /
  RDB / RFK / RFN / RFN / RHBA / RKC / RKD / RQB / RQC / RTA / RTB / RTC / RTD / RTE / RTF / RTG / RTH / RTJ / RTJ / RTK / RTK / RVA / RVA / RWPA / RWPC / SHDA / SHDB / SHDC / SIDA / SNJA / SNJB / SPJA / SPJC / STJA / STJB / TXBA / TXDA / TXDB / TXWA / TYBA / TYDA / TYWA / TZJA / TZJB / UFBA / UFDA / UFDB / UFWA / UKBA /
  UKDA / UKDB / UKWA      

scope of delivery:

• camshaft adjusting tools, to be used as OEM 21-105, 303-1061, 21-162B, 303-367, 303-376, 323-029
• injection pump adjusting tools, to be used as OEM 2064, 23-047, 310-055, U20003, 21-260, 303-732, 23-020, 21-238, 303-679A, 303-1151
• flywheel / crankshaft locking tool, to be used as OEM 303-1060, 0132-AB, 0178-D, 21-151, 0194-B, 21-263, 303-735, 49JE02021, 21-234, 21-251, 0194-C, 21-262, 303-734, 21-163, 303-620, 21-210, 21-123, 21-234, 21-251, 303-675, 303-698
• camshaft sprocket puller, to be used as OEM 21-229, 303-651
• feeler gauge

Technical data:

• tool tray made from high-resistance foam
• suitable for all BGS workshop trolleys
• tool tray suitable for:
  • 6 beer bottles 0,33 l (standard size)
  • peanuts, can diameter max. 85 mm, height max. 77 mm
  • chips, can diameter max. 75 mm, height max. 87 mm
  • BGS® bottle opener (BGS 8)

Technical data:

• dimensions (W x D x H) 567 x 408 x 44 mm
• height of the insert without tools 32 mm

scope of delivery:

• BGS 8412 ratcheting hose clip pliers 0 - 38 mm
  • opening from 0 up to 38 mm
  • ratchet locking function
  • opens using spring mechanism

• BGS 471 hose clip pliers CLIC / CLIC-R
  • 190 mm length
  • turnable, angled jaws

• BGS 473 ratcheting hose clip pliers
  • for spring pipe clamps
  • interchangeable jaws (2 pairs)
  • length 200 mm

• BGS 161 CV-joint boot pliers
  • with ear-type holder, prevents loosening of sleeve fastening
  • universal use, works on fuel hoses, CV boots
  • for working on Oetiker System hose clamps
  • length 235 mm

• BGS 8600 hose clamp pliers
  • specifically made for space-saving hose clips
  • ratchet mechanism for holding hose clips open
  • especially suitable for new type hose clips on VAG fuel lines

• BGS 470 hose clamp pliers with bowden cable
  • for installation and removal of 18 - 54 mm long elastic, self-locking, spring steel collars
  • can be used even in narrow spaces
  • length 630 mm

• BGS 8804 Hose clamp tool
  • suitable for spring steel band clamps
  • by turning the knurled nut, the tool opens the hose clamp and it can remain in this position until the disassembly / assembly is complete
  • max. opening: 62 mm

Technical data:

• tray made of high quality soft foam
• suitable for hose clamp set BGS 504

Technical data:

• tool tray made from high-resistance foam
• suitable for all BGS workshop trolleys
• suitable for BGS 8880

Technical data: