Main page » Tools » BGS » Industrial Chemicals » Adhesives, Sealants

Adhesives, Sealants

10,30 EUR

incl. 16% tax excl. Shipping costs

15,70 EUR
78,50 EUR per 100 g

incl. 16% tax excl. Shipping costs

for securing, sealing and gluing of screw connections
replaces common locking methods such as splints, spring washers, etc.
can be used in engine construction, racing, mechanical engineering, in workshops and garages, for industrial applications, etc.
colour: dark blue
max. thread size: M36
Viscosity range at 20 °C: 2,000 - 7,500 mPa.s
max. filling capacity: 0.25 mm
Hand-tight: 10 - 20 min
Functional hardness: 1 - 3 h
temperature resistance: -55 - 150 °C
Density at 25 °C: 1.05 g/cm³
breakaway torque: 17 - 22 Nm (DIN EN ISO 10964)
Shear strength: 9 - 13 N/mm² (DIN 54452)

12,90 EUR
25,80 EUR per 100 g

incl. 16% tax excl. Shipping costs

Latest generation cyanoacrylate adhesive
for bonding a wide variety of material connections
(metal, rubber, wood, cardboard, ceramics and most plastics) to themselves and to each other
Despite residual flexibility, a very high strength is achieved with most materials
remains flexible with fast hand-tight
no impairment of electronic components
Due to the innovative dosing option
No running
Valve gate
No clogging of the grommets
Easy application of the adhesive
Precise dosing
Basis: Methoxyethyl cyanoacrylate
colour: transparent, clear
Viscosity 25°C (Brookfield): approx.120 - 250 mPa.s
Density: approx. 1.12 g / cm³
Gap filling capacity: < 0.1 mm
Temperature resistance: from -50 to + 80 °C
Hand-tight: approx. 10 - 120 seconds
Final strength: 24 hours

7,30 EUR
60,83 EUR per 100 g

incl. 16% tax excl. Shipping costs

Latest generation cyanoacrylate adhesive
for bonding a wide variety of material connections
(metal, rubber, wood, cardboard, ceramics and most plastics) to themselves and to each other
Despite residual flexibility, a very high strength is achieved with most materials
remains flexible with fast hand-tight
no impairment of electronic components
Due to the innovative dosing option
No running
Valve gate
No clogging of the grommets
Easy application of the adhesive
Precise dosing
Basis: Methoxyethyl cyanoacrylate
colour: transparent, clear
Viscosity 25°C (Brookfield): approx.120 - 250 mPa.s
Density: approx. 1.12 g / cm³
Gap filling capacity: < 0.1 mm
Temperature resistance: from -50 to + 80 °C
Hand-tight: approx. 10 - 120 seconds
Final strength: 24 hours

7,70 EUR
30,80 EUR per 100 g

incl. 16% tax excl. Shipping costs

one-component, waterproof and paintable seal for horizontal
and vertical surfaces
suitable for different areas, such as roofs, walls, wet cells, vehicles
for vehicles as a complement to underbody protection and as a spreadable joint sealing
waterproofing for roof lights, skylights, gutters, pipe junctions, wall connections, chimney connections, outdoor ventilation, cracks and fractures in masonry, etc.
suitable for substrates such as Styrofoam®, plastics, concrete, wood, stone, metal, sanded roofing felts
UV resistant and not sensitive to rain and spray water (even during curing)
adheres to old and wet surfaces
outstanding resistance to chemicals
no subsequent stickiness on the surface
excellent workability, only 2 coats are necessary
colour: grey
Consistency: low-viscosity, pasty
Viscosity PP25, 11/s: 10 - 30 Pa.s
hardens at room temperature
Spec. weight: 1,4 g/cm3
Skin formation 23 °C / 50% rel. humidity: 20 - 40 minutes
Hardening time: approx. 3 hours (1 mm layer thickness)
Processing temperature of: +5 °C to +40 °C
Temperature resistance of: -40 °C to +90 °C (when hardened)
water vapour permeable
Consumption
approx. 1.3 kg/m² at approx. 1mm application thickness
approx. 2.1 kg/m² at approx. 2mm application thickness with fleece

27,90 EUR
23,25 EUR per kg

incl. 16% tax excl. Shipping costs

2-Component cyanacrylate-based adhesive
best adhesion properties on many different types of material such as metal, many plastics, e.g. PVC, ABS, PC, PBT, rubber, porose/absorbent materials such as wood, paper, cardboard, leather and textiles
application in vehicle construction and industrial areas
thixotropic
Drip free
Extremely impact resistant
Mechanically editable
applications overhead and in vertical locations
Good chemical resistance
Low blowing
transparent bonding of PMMA
incl. 3 mixing tubes, additional tubes BGS 80603-1 can be ordered separately
Mix ratio: 4:1
Processing time: approx. 3 minutes depending on temperature
temperature resistance: -40°C to +80°C, short-term up to +120°C
Processing temperature: from -25°C
Filling capacity: up to 6 mm

21,90 EUR
219,00 EUR per 100 g

incl. 16% tax excl. Shipping costs

4,70 EUR

incl. 16% tax excl. Shipping costs

for sealing gear and engine housings, flange connections, bearing caps and differential housing covers
Automotive and motorcycle industry, chemical and petrochemical industry, gas, water and electricity companies, drilling rigs and many more
Solvent-free design element for all seal sizes
Ideal for complicated shaped parts
Can be used on vertical surfaces thanks to thixotropic properties
Seals the parts against low pressures (about 5 bar) already after joining
The max. pressure sealing capability of up to 350 bar is achieved with elimination of oxygen following complete hardening (depending on sealing surface size)
colour: green
Viscosity range at 20 °C: 17,000 - 50,000 mPa.s
max. filling capacity: 0.30 mm
Hand-tight: 20 - 40 min
Functional hardness: 1 - 3 h
temperature resistance: -55 - 150 °C
Density at 25 °C: 1.10 g/cm³
Load: 2 - 4 Nm
Flashpoint: >100 °C
Shear strength: 4 - 6 N/mm² (DIN 54452)
strength class: 1 (DIN 30661)

12,90 EUR
25,80 EUR per 100 g

incl. 16% tax excl. Shipping costs

The GRP repair mat is a unique, easy-to-use repair film that is activated and hardened by UV radiation or sunlight. The film is glass fibre reinforced polyester with extremely good adhesion and a long life. No mixing, no weighing, no sources of error
Application industry:
maintenance and repair of roofs, stairs, basins, pipes, conduits, cable ducts, control boxes, etc.
Area of application automotive/truck/caravan/transport:
bumpers, radiator, exhaust pipe, lines, box bodies, wind deflectors, all plastic and body parts
Area of application leisure/hobby/sport:
Jet skis, canoes, boats, GRP fairings, surfboards, model-making, windows, fences, roofs, doors and all surfaces made of wood, metal, glass, ceramics, masonry, concrete and plastic
Easy to use: simply cut to repair area, stick on - done
extremely durable, glass fibre-reinforced plastic (GRP)
vibration-resistant, remains flexible
weather, UV and damp-resistant
Good reworkability (sanding, drilling, painting, etc.)
Resistant to oils and solvents
Constant temperature resistance from -40°C to +200°C
No shrinkage or expansion during processing and hardening
adheres to all surfaces except polypropylene (PP)
Fast hardening (from 5 min. depending on UV radiation)