Ball Joint

• allows disassembly of ball joints in various sizes
• suitable for cars, light trucks and SUVs
• 5 interchangeable forks 20 - 22 - 24 - 27 and 30 mm
• maximum pressure range: 125 mm
• heavy duty

Technical data:

• forged
• clamping range in 2 positions adjustable: up to 30 and 55 mm
• for extracting the ball joints on tie rods and stabilizers

Technical data:

• universally applicable
• for all vehicle types for removing bearings for separating the ball plug when removing the ball joints

Technical data:

• with interchangeable fork heads
• for quick release of tie rod ends, steering levers, etc.
• fork openings approx. 17.4 - 23.8 - 28.5 mm
• manufactured from forged carbon steel
• handle for manual use
• adaptor for air hammer use (10 mm shaft)

Technical data:

• manufactured from hardened carbon steel
• for a quick and secure separation of tie rod ends pitman arms etc.

Technical data:

• for ejecting the ball joint out of axle legs, drop arms, stabilisers
• ejectors are universally usable, fit e. g. Mercedes-Benz, VAG and Opel
• especially for working in narrow spacea
• suitable only for working on closed joints or joints with centre hole
• sizes: 23x55, 28x55, 34x63 mm

Technical data:

• for Mercedes Benz M-class W163 until June 2005 and W164 as of 2005
• for professional changing of the front and rear axle suspension ball joints
• facilitates loosening and tightening counternuts of the suspension joints with correct torque
• suitable for the lower suspension joints on front - and rear axle
• 3/4" drive

Technical data:

• for loosening / tightening of suspension joints
• suitable for models: Citroen BX (9/1982 - 1994), C5, Xantia / Peugeot 305 (7/1982 - 1990), 405 (6/1987), 406, 605, 607 etc.

Technical data:

• forged execution separator

scope of delivery:

• fork type, length 400 mm, fork opening 19 mm
• fork type, length 325 mm, fork opening 25 mm
• fork type, length 295 mm, fork opening 28.5 mm
• fork type, length 288 mm, fork opening 36 mm
• fork type, length 300 mm, fork opening 41.5 mm

Technical data:

• for spreading the seats of shock absorbers and steering parts
• with 2 exchangeable spreading inserts (5 mm and 8 mm depth) and guide pins 8x10 mm (2x) and 10x12 mm (2x) for the shock absorber seat in the wheel bearing housing when changing the damper, for wishbone ball joint seat when disassembling the suspension strut etc.
• slipping off is avoided by strong guiding bolts that are stuck in the screw holes
• a spindle with 13 mm external hexagon pushes the spreader in the opening, no need to use a hammer
• material fatigue and breakage esp. of aluminium parts is avoided

Technical data:

• for separating ball joints from axle parts
• can be used with mechanic and hydraulic spindle
• made of forget SCM 440 steel, separating forks in 30, 34 and 40 mm
• max. clamping width: (hydraulic): 95 mm
• max. clamping width: (mechanic): 60 mm

scope of delivery

• spindle (hydraulic), 12 t
• spindle (mechanic)
• thrust Piece
• jaw 30 mm, forged steel
• jaw 34 mm, forged steel
• jaw 40 mm, forged steel
• lower separator
• spindle adapter

Technical data:

• for assembly and disassembly of the upper suspension joints / guide joints on VW T4 Bus, Multivan, California, etc.
• suitable for: VW T4 front axle

scope of delivery:

• 1 extractor with hardened spindle, drive: external hexagon 24 mm, opening width 55 mm, inside height 70 mm
• 2 pressure piece adapters for pressing out
• 1 pressure piece adapter for pressing in
• 2 extension plates to adapt the extractor to the joint

Technical data:

• to replace ball joints, universal joints, brake anchor bolts
• suitable for SUVs, vans and other vehicles with large parts

scope of delivery:

• step washer plate with large bore
• step washer plate with small bore
• C-frame with spindle
• sleeve, inner diameter: 44.4 mm, outer diameter: 50.8 mm, length: 45 mm
• sleeve, inner diameter: 56.6 mm, outer diameter: 63.4 mm, length: 45 mm
• sleeve, inner diameter: 69 mm, outer diameter: 76.1 mm, length: 56 mm

Technical data:

• allows dismantling and mounting of supporting joints
• suitable for Mercedes Benz W211 (E-class) / W220 (S-class) / W230 (SL-class) series
• heavy duty type

scope of delivery:

• pressure spindle 190 mm with 24 mm drive
• C-clamp with max. 155 mm opening
• 2 compression heads 40 mm and 54 mm
• 3 pressure pieces 22 mm, 33 mm and 57 mm

Technical data:

• this extension tool allows a disassembly and assembly of the ball joints, suitable for Mercedes Benz W211 (E-class) / W220 (S-class) / W230 (SL-class) series
• to be used as OEM 2113230068
• material: S45C steel
• to be used with BGS 8293

Technical data:

• for removal of e.g. suspension ball joints, tie rod joints, etc.
• this tool is made from special chrome molybdenum / S45C steel for max. torque
• adjustable pressure range up to 70 mm

Technical data:

• for removal and installation of lower ball joints on the wishbone
• suitable for Mercedes Benz models W124, W129, W201
• consisting of pressure frame, disassembly and assembly pressure piece and reducer ring
• allows a much easier renewing of ball joints
• spindle with hexagon drive

Technical data:

• for separating ball joints
• includes 5 fork separators: fork opening: 20 - 24 - 30 - 35 - 42 mm
• suitable for air air hammer kit e. g. BGS 3515
• high loosening power due to vibration
• shaft diameter 10 mm

Technical data:

• for loosening tightly fitted ball joints
• turning of ball joint with this tool facilitates dismounting
• suitable for Audi A4, A5, A6, A7, Q5
• 27 mm hexagon with guide bore
• 12.5 mm (1/2") drive

Technical data:

• especially designed for dismounting and mounting of supporting joints in lower control arms (wishbones)
• suitable for following models with control arms made of aluminum and steel: Volvo S60 (2000-2009), V70 (1999-2007), XC70 (1999-2007), S80 (1998-2006), XC90 (2002-2014)
• to be used as OEM 9995796

scope of delivery:

• 1 press tool
• 2 guide bolts
• 3 ball joint adaptors M12x1.75 - M14x1.5 - M14x2.0
• to be used with e.g. the following BGS sliding hammers:
  sliding hammer BGS 7772 + adaptor BGS 7772-4
  sliding hammer BGS 7719 + adaptor BGS 7719-1

Technical data: