Turbo Charger

• wrench for assembly and disassembly of turbo chargers
• facilitates assembly of hard-to-reach screws
• 10 mm (3/8") drive
• 12 mm, 12-point profile

Technical data:

• for pressurizing turbocharger systems with Henn clamps - bayonet lock Ø 31.0 - 61.0 mm
• suitable for turbo systems with inserted and with steel ring secured pressure hoses
• allows professional and economical diagnosis

scope of delivery:

• test adaptor Ø 31.0 x 41.1 mm
• test adaptor Ø 38.0 x 48.1 mm
• test adaptor Ø 46.0 x 56.1 mm
• test adaptor Ø 51.1 x 61.1 mm
• test adaptor Ø 56.0 x 66.1 mm
• test adaptor Ø 61.0 x 71.1 mm
• sealing cap Ø 31.0 x 41.1 mm
• sealing cap Ø 38.0 x 48.1 mm
• sealing cap Ø 46.0 x 56.1 mm
• sealing cap Ø 51.1 x 61.1 mm
• sealing cap Ø 56.0 x 66.1 mm
• sealing cap Ø 61.0 x 71.1 mm
• pressure regulator with shut-off valve, pressure gauge and test hose with quick coupler

Technical data:

• to remove the screws on the intake manifold on R9M 1.6 turbo diesel engines or the engine bonnet screws
• suitable for the following vehicles:
  • Nissan Primastar Turbo
  • Opel Movano
  • Renault Master
  • Renault Traffic

• with knurling for better grip

Technical data:

• for checking the charging system components when installed
• professional and economic troubleshooting
• safety valve prevents applying excessive pressure
• suitable for turbochargers, G-chargers, compressors
• fits on most charging system hoses
• also suitable for leak detection
• includes 4 pairs of adaptors

suitable for the following hose sizes:

• 35 - 40 - 45 mm
• 50 - 55 - 60 mm
• 65 - 70 - 75 mm
• 80 - 85 - 90 mm

Technical data:

• for checking the charging system components when installed
• professional and economic troubleshooting
• suitable for turbochargers, G-chargers, compressors
• includes following adaptors:
  • 2-step pressure adaptor for hose sizes 55 - 60 mm
  • 2-step sealing cap with pressure gauge for hose sizes 55 - 60 mm
  • 2-step pressure adaptor for hose sizes 65 - 70 mm
  • 2-step sealing cap with pressure gauge for hose sizes 65 - 70 mm

Technical data:

• for the exchange of the vacuum-pressure adjusters in VAG engines with turbochargers with position sensor

Technical data:

• to be used for passenger vehicles and trucks with turbo engines, diesel and petrol engines
• for checking the charging system components when installed
• time saving and professional locating of leakages on air intercooler and charging system components
• can also be used for leakage test exhaust gas recirculation valves (EGR)
• pressure loss can be located easily by hand or leakage spray
• to be used with standard air inflators, pressure loss is identified directly with air inflator
• suitable for internal hose diameters 31.0 - 110.0 mm
• double stage offset sealing plug and air adaptor for hoses without bayonet fitting
• includes high pressure safety valve, up to 1.8 bar

Scope of delivery:

• gradiation/sizes:
  • double stage inlet adaptor, 31 x 38 mm
  • double stage inlet adaptor, 46 x 51 mm
  • double stage inlet adaptor, 55 x 60 mm
  • double stage inlet adaptor, 65 x 70 mm
  • double stage inlet adaptor, 75 x 80 mm
  • double stage inlet adaptor, 85 x 90 mm
  • double stage inlet adaptor, 95 x 100 mm
  • double stage inlet adaptor, 105 x 110 mm
  • 1 universal air inlet adaptor with hose

Technical data: