Fuel System

• all-purpose, adjustable from 75 to 160 mm
• for removing and tightening the plastic ring on fuel tank sender units

Technical data:

• to check nozzles for damage
• Ø 0.45 - 0.50 - 0.55 - 0.60 - 0.65 - 0.70 - 0.75 - 0.80 - 0.85 - 0.90 - 0.95 - 1,00 - 1.05 - 1.10 - 1.15 - 1.20 - 1.25 - 1.30 - 1.40 - 1.50 mm

Technical data:

• facilitates the adjustment of carburettor kits, particularly suitable for work in tight spaces such as motorcycles
• suitable for slotted screws
• slot size: 1 x 5 mm
• adjustable depth stop 0 - 5.5 mm
• marked, lockable knurled sleeve for detecting the range of rotation 

Technical data:

• for assembly and disassembly of the injector pump

suitable for the following Mercedes-Benz engines:

• OM 601 2.0 l / 2.2 l / 2.3 l
• OM 602 2.5 l / 2.9 l
• OM 603 3.0 l / 3.5 l
• OM 605 2.5 l
• OM 606 3.0 l
• OM 615 2.0 l / 2.2 l
• OM 616 2.4 l
• OM 617 3.0 l

Technical data:

• for loosening / tightening petrol pipes on fuel filters
• open ring spanner, reinforced

Technical data:

• for loosening / tightening petrol pipes on fuel filters
• open ring spanner, reinforced

Technical data:

• for removing and installing the fuel sensor fixing ring

Technical data:

• to professionally disconnect as well as lock the push-fit connector (round design) of fuel return line (on injectors)
• attempting to solve the connection without this tool can lead to damage the connection and the need to replace the fuel return line in the engine compartment

suitable for VAG 2.0, 2.7 and 3.0 TDI Common Rail Diesel engines, built in following vehicles:

• Volkswagen Eos
• Volkswagen Golf V, VI
• Volkswagen Jetta
• Volkswagen Passat, Passat CC
• Volkswagen Scirocco
• Volkswagen Tiguan
• Volkswagen Transporter T5
• Volkswagen Phaeton
• Audi A3, A4, A5, A6, A7, Q5
• Seat Exeo
• Skoda Yeti

engine codes:

• BMK, BPP, CAAA, CAAB, CAAC, CAAD, CAAE, CAGA, CAGB, CAGC, CBAB, CBAC, CBDA, CBDB, CBDC, CDU

Technical data:

• designed to remove and install the fuel tank sensor locking ring
• suitable for e. g. Audi A4 (2008-2016), A6 (2008-2016), A6 (2005-2011), A8 (1994-)
• to be used as OEM T40068A, 3342

Technical data:

• T-shaped head engages into the loosening slot of the filter bottom

suitable for the following models:

• VW, Audi, Seat, Skoda, Volvo with following filters:
• Mahle / Knecht OC51, OC83, OC214
• Mann W920, W920/7, W930, W930/9, W940, W940/15 W940/20, W940/25, W950, W950/5, W962/2, W962/7, W962/14, W1130/1, WK940/4, WK950/4, WK962/5, WP931, WP962/3

Technical data:

• for removing and installing fuel filters on Volvo Diesel engines

suitable for the following models:

• VW Crafter 5-cylinder (2006-)
• Volvo C30, C70, S40, S60, S80, V50, V60, V70, XC60, XC70, XC90

Technical data:

• for removing the solenoid on high pressure Diesel pump

suitable for the following models:

• Ford Tourneo Connect, Transit (-2010), Transit Connect (-2006), Mondeo (-2007), Focus (-2004)

with following engines:

• 1.8 Duratorq Di / TDDi / TDCI - 2.0 Duratorq Di / TDDi / TDCi - 2.2 Duratorq TDCi - 2.4 Duratorq Di / TDDi / TDCi
• to be used as OEM 303-1286

Technical data:

• for disconnecting quick connect couplings on fuel lines
• robust and time-saving operation when replacing fuel filters
• allows use in areas of difficult access or on connectors that are close to sharp bends (i.e. fuel filter top pipes)
• suitable for application on vehicles from following manufacturers: VAG, Fiat, Jeep, Opel, Vauxhall, Ford, Chrysler and Volvo
• to be used as Opel OEM J-41769 CH-41769

Technical data:

• for quick and damage free replacement of diesel fuel filters

suitable for:

• Fiat, VAG, Volvo, Jeep, Chrysler 1482C

scope of delivery:

• 2 pairs of release tools

Technical data:

• for releasing and tightening the fuel filter locking ring from the tank sender to the fuel tank
• allows simple and time-saving work

suitable for the following models:

• Opel: Antara > 2007, Astra-J > 2010, Insignia > 2009, SIGNUM 2003 - 2008, Vectra-C 2003 - 2008
• Mercedes-Benz: W204, W207, W212 E and C-class
• BMW: F01/F02/F10/F12, 7, 6 and 5 Serie
• Volvo: T4/T5 engines (> 2010) and S40, V40

• to be used as OEM BMW 161190, Mercedes-Benz W001589000700 / 001 589 000 700, Opel / Volvo EN-48279

Technical data:

• for releasing and tightening the fuel filter locking ring from the tank sender to the fuel tank
• allows simple and time-saving work
• avoids damages to the ring in connection with accurately fitted tool

suitable for following models:

• Alfa Romeo GT, 147, 156, 159, 166
• Fiat Grande Punto, Idea, Linea, Multipla, Panda, Nuova Bravo, Panda 4x4, Punto, Sedici, Doblo, Croma, Stilo, Ducato, Soblo Cargo, Idea Van, Grande Punto Van, Multipla Van, Panda Van, Scudo
• Lancia Y, Ypsilon, Musa Thesis
• Ferrari 360 Spider, 430 Coupé, 430 Scuderia, 430 Scuderia Spider, 430 Scuderia Spider 16M, 430 Spider, 575 Superamerica, 757 Maranello, 599 GTB Fiorano, 612 Scaglietti, Enzo
• Maserati 4200 Coupé, 4200 Gransport, 4200 Spyder, GranTurismo and Quattroporte
• to be used as OEM 1.870.736.000

Technical data:

• to push out the tooth belt sprocket of Diesel pump and removing the Diesel pump without disturbing the timing belt
• suitable for 2.2L (G9T) and 2.5L (G9U) Diesel engines

built in following vehicle models:

• Renault Master II (1999-2003)
• Renault Espace IV (2001-)
• Renault Laguna II (2002-2006)
• Renault Avantime (2001-2003)
• Renault Vel Satis (2001-2009)
• Nissan lnterstar (1999-2003)
• Vauxhall Movano I (1999-2003)

• to be used as Opel OEM KM-6207, Renault OEM MOT1548

Technical data:

• for removing and installing the diesel high-pressure pump
• high pressure pump wheel is held in correct position
• no adjustment of the engine timing necessary

suitable for the following vehicle models with 2.0 TDCi ECOblue engine:

• Ford Edge (2018-2021)
• Ford Focus (2018-)
• Ford Galaxy (2018-2021)
• Ford Kuga (2019-)
• Ford Mondeo (2019-2021)
• Ford Ranger (2019-)
• Ford S-MAX (2018-2021)
• Ford Transit (2016-)
• Ford Transit Custom (2016-)
• Ford Tourneo Custom (2016-)

for engine code:

• BC2X, BCCA, BCCB, BCCC, BCDA, BCFB, BCRA, BJFA, BJFB, BJFC, BJFD, BJRA, BJRB, BKFA, BKFB, BKFC, BKFD, BKRA, BKRB, BLFA, BLFB, BLFC, BLFD, BLHA, BLRA, BLRB
• YL2X YLCA, YLCB, YLCC, YLDA, YLDC, YLF6, YLFA, YLFB, YLFS, YLR6, YLRA, YMCA, YMCB, YMCC, YMDA, YMF6, YMFA, YMFB, YMFS, YMHA, YMR6, YMRA, YN2X, YNCA, YNF6, YNFA, YNFB, YNFS, YNR6, YNRA

scope of delivery:

• 1 base plate, to be used as OEM 303-1635/1
• 1 pressure screw, to be used as OEM 303-1635/2
• 3 support bolts, to be used as OEM 303-1635/3
• 1 assembling screw, to be used as OEM 303-1635/6
• 3 fastening screws
• 3 nuts
• 1 cover ring

Technical data:

• suitable for Fiat, Ford, Opel, Peugeot, Renault, Citroen, VW

Technical data:

• removing and disconnecting tools for pipe connectors
• for air conditioning, fuel, air and oil pipes
• fits nearly all brands

Technical data:

• for opening and closing fuel line clutches
• for removal and replacement of hose clip connections on in-line fuel filters
• a must-have when changing the fuel filter unit and repairing the engine
• used for Volkswagen VW-Audi, Fiat, GM, Opel, Mercedes-Benz (e. g. M class petrol engine) etc.

Technical data:

• for quick and easy separating of gasoline quick locks
• suitable for quick coupler fuel filters and similar connections
• for all quick coupler that are separated by pressure on the outer ring
• electroplated surface
• handle dip coated

Technical data:

• for assembly and disassembly of the plastic retaining rings of the fuel tank sender unit
• 5 different shaped pairs of clamping arms allow use on a variety of fuel tanks
• can be used for diameters of 75-160 mm, 80-122 mm and 110-170 mm
• can be used with 2 and 3 arms
• 24 mm drive

Technical data:

• prevents damage to the fuel filter housing
• clamping device for clamping the filter housing in a bench vise
• special wrench allows easy disassembly of the housing cover

suitable for:

• Opel engines DA13, Z13DT, Z13DTH, Z13DTJ, Z19DT, Z19DTL, Z19DTH (not for Corsa-D and Meriva as of 2007)
• Fiat-/Lancia engines 1.3 16V MJTD, 1.3 16V JDT, 1.9 8V JTD, 2.0 8V JDT, 2.2 16V JTD, 2.3 16V JDT, 2.8 JTD 3.0 16V JDT (only for vehicles with fuel filter insert)

Technical data:

• is required when replacing, setting, disassembling and assembling Bosch Diesel distributor injection pumps

scope of delivery:

• socket, 3-pt., 14 mm,
  for cover screws on distributor pumps,
  12.5 mm (1/2") drive
• socket, 3-pt., 26 mm
  for central screw (high pressure side) on
  Bosch VE and VP distributor pumps,
  12.5 mm (1/2") drive
• socket, with 2 areas, 12.4 mm
  pressure control valve on Bosch VP37 distributor pumps drive,
  12.5 mm (1/2") drive

Technical data:

• for changing the fuel filter insert on Chevrolet, Citroen, Fiat, Saab, Suzuki, Opel
  
  • 1.3 JTD / CDTi / DDiS
  • 1.9 JTD / CDTi / TiD
  • 2.0 VCDi / HDi / JTD
  • 2.2 HDi / JTD
  • 2.8 HDi / JTD
  • 3.0 HDi / JTD

Technical data:

• for loosening the triangle head screws in the flow controller cover
• suitable for Bosch common rail and TDI injection pumps
• sizes: 7 and 12.6 mm

Technical data:

• for removing and installing the locking ring on tank level sensors
• 120 mm internal diameter with 3 slotted teeth
• to be used as OEM T10202 (3087)

suitable for following models as of year 2000:

• Audi A3, A4, A6, A7, A8, Q3, Q7, R8, TT
• VW Polo, Beetle, Golf, Golf Plus, Jetta, Eos, Scirocco, Passat, Passat CC, Sharan, Touran, Tiguan, Touareg, Phaeton, Caddy, Transporter
• Porsche Cayenne
• 12.5 mm (1/2") drive

Technical data:

• for loosening and tightening the mounting ring on tank sensors
• allows working in tight spaces
• diameter: adjustable from 87 to 170 mm
• Drive 19 mm hexagon

Technical data:

• for loosening the low pressure fuel feed line that supplies the high pressure fuel pump

suitable for following MINI Cooper S models:

• Clubman, JCW (R55), engine N14/18 (2008-03.2012)
• Hatchback, JCW (R56), engine N14/18 (2007-03.2012)
• Convertible, JCW (R57), engine N14/18 (2009-03.2012)
• Coupe,JWC (R58), engine N14/18 (2012-03.2012)
• Roadster, JWC (R59), engine N14/18 (2012-03.2012)
• Countryman, JWC (R60), engine N18 (2011-03.2012)
• to be used as OEM 130250

Technical data:

• is required when replacing, setting, disassembling and assembling Bosch diesel distributor injection pumps
• suitable for 3-point screw heads

scope of delivery:

• socket for EDC pump covers (1996-2003) on Bosch VP 37 distributor pumps
  • 6.3 mm (1/4") drive / external hexagon 15 mm socket, 3-point, 7 mm
• socket for Bosch distributor injection pumps (Bosch OEM No. 098661750)
  • 6.3 mm (1/4") drive - external square 12.5 mm (1/2") socket, 3-point, 12.6 mm
• socket for cover screws on distributor pumps
  • 12.5 mm (1/2") drive socket, 3-point, 13 mm
• socket for central screw (high pressure side) on Bosch VE and VP distributor pumps
  • 12.5 mm (1/2") drive socket, 3-point, 26 mm
• socket for pressure control valves on Bosch VP37 distributor pumps
  • 12.5 mm (1/2") drive with 2 surfaces, 12.4 mm

Technical data:

• all-purpose, adjustable from 80 to 199 mm
• suitable for most models of Mercedes, BMW, Audi, Volkswagen, Citroen, etc.
• for removing and tightening the plastic ring on fuel tank sender units

Technical data: