Brake Line and Bleeding

• with strengthened hexagon ends
• double offset

Technical data:

Technical data:

• allows a clean oil change by suction
• usable for engine, transmission, rear axle oil and other non-corrosive liquids
• 5 l fluid container
• suitable for oil extraction on e.g. all Smart models but also for all other vehicles for which an oil change is to be performed without using a car lift
• with a special brake breather hose and 2 extraction hoses
• easy brake bleeding on brake systems of all types of vehicles

Technical data:

• suitable for BGS 66512

Technical data:

• suitable for BGS 66512

Technical data:

• for easy bleeding of hydraulic clutch systems and brake systems without removing the wheels
• allows one-person bleeding
• consists of 6 brake bleeding wrenches, 22-point, sizes: 7 - 8 - 9 - 10 - 11 - 12 mm
• 120 cm silicone hose with non-return valve
• suitable for universal bleeder nipples

Technical data:

• for bleeding brake systems
• for safe connection from brake bleeder to the reservoir of the master brake cylinder
• quick and easy to install
• special sealing ensures effective pressure sealing of the system
• angled, 360° rotatable compressed air connection
• compatible with most brake bleeding units with german compressed air quick coupling on the brake fluid pressure hose

suitable for the following vehicle models:

• Tesla model S (2012-2021)
• Tesla model X (2015-2021)
• Tesla model 3 (2017-2021)
• Tesla model Y (2020-2021)

scope of delivery:

• 1 brake bleeding adapter | Tesla Models 3 & Y (BGS 66518)
• 1 brake bleeding adapter | Tesla Models S & X (BGS 66519)

Technical data:

• for bleeding brake systems
• for safe connection from brake bleeder to the reservoir of the master brake cylinder
• quick and easy to install
• special sealing ensures effective pressure sealing of the system
• angled, 360° rotatable compressed air connection
• compatible with most brake bleeding units with german compressed air quick coupling on the brake fluid pressure hose

suitable for the following vehicle models:

• Tesla model 3 (2017-2021)
• Tesla model Y (2020-2021)

Technical data:

• for bleeding brake systems
• for safe connection from brake bleeder to the reservoir of the master brake cylinder
• quick and easy to install
• special sealing ensures effective pressure sealing of the system
• angled, 360° rotatable compressed air connection
• compatible with most brake bleeding units with german compressed air quick coupling on the brake fluid pressure hose

suitable for the following vehicle models:

• Tesla model S (2012-2021)
• Tesla model X (2015-2021)

Technical data:

• required when disassembling / assembling injection nozzles
• for screw connections on fuel lines
• bendable, flexible up to 45°
• compact design for use in confined spaces

Technical data:

• for gentle and professional bleeding and changing of brake fluid on vehicle brake and clutch systems
• includes the following adapters for brake fluid reservoirs:
  • 1 adaptor, angled 90 degrees, for Mercedes-Benz, BMW, Volkswagen, Skoda, Volvo, Land Rover, Jaguar, Bentley, Porsche, Opel, Chevrolet, Ford, Citroen, Peugeot, Mazda, Renault, MG, Lexus, Cadillac etc.
  • 1 adaptor, angled 90 degrees, for Ford, Peugeot, Toyota and some Audi models
  • 1 adaptor, straight, for Tesla
• max. power: 35 W
• max. flow rate: 1.2 L/min
• dimensions: 285 x 230 x 370 mm
• filling hose length: 3.5 m
• noise level: 70 dB
• device shuts off when container is empty

scope of delivery:

• 1 brake fluid bleeder
• 3 adaptor
• 1 bleeding bottle
• 1 bleeding hose

Technical data:

• for use in combination with brake bleeding devices
• easy and quick to operate
• flexible and infinitely adjustable
• optimal sealing by a conical rubber seal
• 90° rotatable angle connection enables use even in tight spaces at the expansion tank
• suitable for most vehicle types
• direct attachment to the filler neck of the master cylinder
• suitable for filler neck diameters up to 39 mm
• diameter rubber seal internal: 19.5 mm
• diameter rubber seal external: 74 mm

Technical data:

• one-man operation, can also be used on clutch systems
• includes a hose for extracting liquids

Technical data:

• suitable for BGS 8066, 8080
• suitable for brake bleeding valve

Technical data:

• suitable for BGS 8080-31

Technical data:

• air-assisted bleeding of brake and clutch systems
• brake fluid and compressed air is separated by a diaphragm
• pressure regulator and gauge for adjustment of working pressure (0 to 3 Bar)
• filling hose has a quick coupling for easy adaptor installation
• connection hose also comes with a quick coupling, 3.7 m length
• with safety valve
• dimensions: Ø 280 mm, height 460 mm
• 5-litre brake fluid reservoir
• comes with one adaptor E20 for the most common brake systems

Technical data:

• with fast fastener coupling 6.3 mm (1/4")
• incl. adaptor for European (compressed air) coupling 6.3 mm (1/4")
  
  • adaptor for Opel Ø 43.5 mm
  • Opel closing lid Ø 43.5 mm, to close the second opening
  • universal adaptor Ø 45 mm
  • universal adaptor, pressure piece, 2 screw hooks with collars and chain
  • Euro adaptor for Audi, BMW, VW, Opel, Ford
  • adaptor for Nissan Ø 49.5 mm, 34.5 mm
  • adaptor for Honda Ø 56 mm
  • adaptor for BMW, Audi Ø 44.2 mm

Technical data:

• for cutting brake pipes with 4.75 mm (3/16") diamteter
• especially suitable for easy operation on tiny space
• self-adjusting, no adjustment of the cutting wheel required
• it is possible to adjust the cutting force
• ratcheting function makes it unnecessary to move the tool completely around tubing

Technical data:

• plastic bottle 1 l
• with holding chain and hook
• variable length bleeding hose
• bleeding nipple adaptor

Technical data:

• helpful when bleeding of brake systems
• automatic refilling of the brake fluid tank
• with valve and clamp
• container size: 1 liter
• also as replacement for BGS 8080

Technical data:

• for removing dirt or corrosion on the brake line surface
• made of composite plastic, prevents damage to the brake line

Technical data:

• suitable for MAZDA 3, VOLVO C30, S40 since 2004, V50FORD Focus as of 2008, Fiesta until 09.2008, C-Max, Galaxy as of 2006, Kuga, S-Max and other European cars with 46.5 mm filling opening
• with European 6.3 mm (1/4") adaptor
• made of aluminium, with angled hose connector for working in tight spaces

Technical data: