Cylinders & Pistons

• with pin for fastening
• suitable for honing tool BGS 1157

Technical data:

• round shank drive: 6.3 mm (1/4")
• no cuts in the cylinder due to adjustable pressure
• jaws: 30 mm medium hard grinding heads, grain size: 220
• to be used with low viscosity oil or special oil for honing at the cylinder bore surface

Technical data:

• for use in automotive engineering, aerospace, hydraulics and plumbing and heating applications
• for machining cylinder barrels before mounting new piston rings
• self-centering internal brush with trim of flexible silicon carbide balls
• for edge breaking, finishing of surfaces and honing work
• produces uniformly honed surfaces with high contact ratio
• honing does not increase the cylinder diameter
• only the surface is restructured
• the honing marks provide the necessary oil adhesion
• to be used with hand drills and stationary machines

• fill length: 1 mm
• brush length: 51 mm
• total length: 200 mm

• the use of grinding oil is recommended!

Technical data:

• for use in automotive engineering, aerospace, hydraulics and plumbing and heating applications
• for machining cylinder barrels before mounting new piston rings
• self-centering internal brush with trim of flexible silicon carbide balls
• for edge breaking, finishing of surfaces and honing work
• produces uniformly honed surfaces with high contact ratio
• honing does not increase the cylinder diameter
• only the surface is restructured
• the honing marks provide the necessary oil adhesion
• to be used with hand drills and stationary machines

• fill length: 1.5 mm
• brush length: 51 mm
• total length: 200 mm

• the use of grinding oil is recommended!

Technical data:

• for use in automotive engineering, aerospace, hydraulics and plumbing and heating applications
• for machining cylinder barrels before mounting new piston rings
• self-centering internal brush with trim of flexible silicon carbide balls
• for edge breaking, finishing of surfaces and honing work
• produces uniformly honed surfaces with high contact ratio
• honing does not increase the cylinder diameter
• only the surface is restructured
• the honing marks provide the necessary oil adhesion
• to be used with hand drills and stationary machines

• fill length: 2 mm
• brush length: 51 mm

• the use of grinding oil is recommended!

Technical data:

• for use in automotive engineering, aerospace, hydraulics and plumbing and heating applications
• for machining cylinder barrels before mounting new piston rings
• self-centering internal brush with trim of flexible silicon carbide balls
• for edge breaking, finishing of surfaces and honing work
• produces uniformly honed surfaces with high contact ratio
• honing does not increase the cylinder diameter
• only the surface is restructured
• the honing marks provide the necessary oil adhesion
• to be used with hand drills and stationary machines

• fill length: 2 mm
• brush length: 64 mm

• the use of grinding oil is recommended!

Technical data:

• for use in automotive engineering, aerospace, hydraulics and plumbing and heating applications
• for machining cylinder barrels before mounting new piston rings
• self-centering internal brush with trim of flexible silicon carbide balls
• for edge breaking, finishing of surfaces and honing work
• produces uniformly honed surfaces with high contact ratio
• honing does not increase the cylinder diameter
• only the surface is restructured
• the honing marks provide the necessary oil adhesion
• to be used with hand drills and stationary machines

• fill length: 2.8 mm
• brush length: 64 mm

• the use of grinding oil is recommended!

Technical data:

• for use in automotive engineering, aerospace, hydraulics and plumbing and heating applications
• for machining cylinder barrels before mounting new piston rings
• self-centering internal brush with trim of flexible silicon carbide balls
• for edge breaking, finishing of surfaces and honing work
• produces uniformly honed surfaces with high contact ratio
• honing does not increase the cylinder diameter
• only the surface is restructured
• the honing marks provide the necessary oil adhesion
• to be used with hand drills and stationary machines

• fill length: 3 mm
• brush length: 64 mm

• the use of grinding oil is recommended!

Technical data:

• for use in automotive engineering, aerospace, hydraulics and plumbing and heating applications
• for machining cylinder barrels before mounting new piston rings
• self-centering internal brush with trim of flexible silicon carbide balls
• for edge breaking, finishing of surfaces and honing work
• produces uniformly honed surfaces with high contact ratio
• honing does not increase the cylinder diameter
• only the surface is restructured
• the honing marks provide the necessary oil adhesion
• to be used with hand drills and stationary machines

• fill length: 7 mm
• drive speed: 300 rpm
• total length: 200 mm

• the use of grinding oil is recommended!

Technical data:

• for use in automotive engineering, aerospace, hydraulics and plumbing and heating applications
• for machining cylinder barrels before mounting new piston rings
• self-centering internal brush with trim of flexible silicon carbide balls
• for edge breaking, finishing of surfaces and honing work
• produces uniformly honed surfaces with high contact ratio
• honing does not increase the cylinder diameter
• only the surface is restructured
• the honing marks provide the necessary oil adhesion
• to be used with hand drills and stationary machines

• fill length: 7 mm
• brush length: 72 mm

• the use of grinding oil is recommended!

Technical data:

• for use in automotive engineering, aerospace, hydraulics and plumbing and heating applications
• for machining cylinder barrels before mounting new piston rings
• self-centering internal brush with trim of flexible silicon carbide balls
• for edge breaking, finishing of surfaces and honing work
• produces uniformly honed surfaces with high contact ratio
• honing does not increase the cylinder diameter
• only the surface is restructured
• the honing marks provide the necessary oil adhesion
• to be used with hand drills and stationary machines

• fill length: 8 mm
• brush length: 72 mm

• the use of grinding oil is recommended!

Technical data:

• for use in automotive engineering, aerospace, hydraulics and plumbing and heating applications
• for machining cylinder barrels before mounting new piston rings
• self-centering internal brush with trim of flexible silicon carbide balls
• for edge breaking, finishing of surfaces and honing work
• produces uniformly honed surfaces with high contact ratio
• honing does not increase the cylinder diameter
• only the surface is restructured
• the honing marks provide the necessary oil adhesion
• to be used with hand drills and stationary machines

• fill length: 9 mm
• brush length: 72 mm

• the use of grinding oil is recommended!

Technical data:

• for use in automotive engineering, aerospace, hydraulics and plumbing and heating applications
• for machining cylinder barrels before mounting new piston rings
• self-centering internal brush with trim of flexible silicon carbide balls
• for edge breaking, finishing of surfaces and honing work
• produces uniformly honed surfaces with high contact ratio
• honing does not increase the cylinder diameter
• only the surface is restructured
• the honing marks provide the necessary oil adhesion
• to be used with hand drills and stationary machines

• fill length: 11 mm
• brush length: 72 mm

• the use of grinding oil is recommended!

Technical data:

• for use in automotive engineering, aerospace, hydraulics and plumbing and heating applications
• for machining cylinder barrels before mounting new piston rings
• self-centering internal brush with trim of flexible silicon carbide balls
• for edge breaking, finishing of surfaces and honing work
• produces uniformly honed surfaces with high contact ratio
• honing does not increase the cylinder diameter
• only the surface is restructured
• the honing marks provide the necessary oil adhesion
• to be used with hand drills and stationary machines

• fill length: 13 mm
• brush length: 72 mm

• the use of grinding oil is recommended!

Technical data:

• for use in automotive engineering, aerospace, hydraulics and plumbing and heating applications
• for machining cylinder barrels before mounting new piston rings
• self-centering internal brush with trim of flexible silicon carbide balls
• for edge breaking, finishing of surfaces and honing work
• produces uniformly honed surfaces with high contact ratio
• honing does not increase the cylinder diameter
• only the surface is restructured
• the honing marks provide the necessary oil adhesion
• to be used with hand drills and stationary machines

• fill length: 16 mm
• brush length: 72 mm

• the use of grinding oil is recommended!

Technical data:

• with pin for fastening
• suitable for honing tool BGS 1157

Technical data:

• for use in automotive engineering, aerospace, hydraulics and plumbing and heating applications
• for machining cylinder barrels before mounting new piston rings
• self-centering internal brush with trim of flexible silicon carbide balls
• for edge breaking, finishing of surfaces and honing work
• produces uniformly honed surfaces with high contact ratio
• honing does not increase the cylinder diameter
• only the surface is restructured
• the honing marks provide the necessary oil adhesion
• to be used with hand drills and stationary machines

• fill length: 17 mm
• brush length: 73 mm

• the use of grinding oil is recommended!

Technical data:

• for honing of engine cylinders
• working diameter: 68 - 70 mm
• shaft diameter: 6.5 mm

Technical data:

• for honing of engine cylinders
• working diameter: 75 - 77 mm
• shaft diameter: 7.8 mm

Technical data:

• for honing of engine cylinders
• working diameter: 81 - 83 mm
• shaft diameter: 7.8 mm

Technical data:

• for honing of engine cylinders
• working diameter: 87 - 89 mm
• shaft diameter: 7.8 mm

Technical data:

• for honing of engine cylinders
• working diameter: 94 - 96 mm
• shaft diameter: 7.8 mm

Technical data:

• for honing of engine cylinders
• working diameter: 68 - 70 mm
• shaft diameter: 6.5 mm

Technical data:

• for honing of engine cylinders
• working diameter: 75 - 77 mm
• shaft diameter: 7.8 mm

Technical data:

• for honing of engine cylinders
• working diameter: 81 - 83 mm
• shaft diameter: 7.8 mm

Technical data:

• for honing of engine cylinders
• working diameter: 87 - 89 mm
• shaft diameter: 7.8 mm

Technical data:

• for honing of engine cylinders
• working diameter: 94 - 96 mm
• shaft diameter: 7.8 mm

Technical data:

• for use in automotive, aerospace, hydraulics and for plumbing and heating applications
• for machining cylinder barrels before mounting new piston rings
• self-centering internal brush with trim of flexible silicon carbide balls
• for edge breaking, finishing of surfaces and honing work
• produces uniformly honed surfaces with high contact ratio
• honing does not increase the cylinder diameter
• only the surface is restructured
• the honing marks provide the necessary oil adhesion
• to be used with hand drills and stationary machines

• fill length: 2 - 2.8 - 6 mm
• brush length: 63 mm

• the use of grinding oil is recommended!

Technical data:

• incl. self-adjusting ratcheting piston ring compressor pliers and 6 exchangeable compressors 73 - 79 mm, 79 - 86 mm, 86 - 92 mm, 92 - 98 mm, 98 - 105 mm, 105 - 111 mm
• tension band height: 38 mm

Technical data:

• spring loaded construction
• allows an installing of the piston without damage of piston rings
• incl. hexagon key

Technical data:

• allows easy and damage-free assembly of piston rings
• head made of hardened steel
• handle made of profile steel, spring mechanism
• suitable for piston ring diameter 60 to 120 mm

Technical data:

• for use in automotive, aerospace, hydraulics and plumbing and heating applications
• for machining cylinder barrels before mounting new piston rings
• for edge breaking, finishing of surfaces and honing work
• produces uniformly honed surfaces with high contact ratio
• honing does not increase the cylinder diameter
• only the surface is restructured
• the honing marks provide the necessary oil adhesion
• to be used with hand drills and stationary machines

scope of delivery:

• 1 honing tool, 28.6 mm (1-1/8"), 2 grinding stones, 20 - 50 mm
• 1 honing tool, 28.6 mm (1-1/8"), 3 grinding stones, 25 - 65 mm
• 1 honing tool, 50 mm (2"), 3 grinding stones, 32 - 89 mm
• 1 honing tool, 75 mm (3"), 3 grinding stones, 51 - 165 mm
• 3 replacment jaws, 100 mm (4"), 57 - 175 mm

• the use of grinding oil is recommended!

Technical data:

• enables non-destructive disassembly and assembly and prevents uncontrolled movement of the piston rings
• suitable for piston ring diameter 40 to 100 mm

Technical data: