Main page » Tools » BGS » Electric / Cordless Battery Tools » Electric / Cordless Battery Tools

Electric / Cordless Battery Tools

Dusters | Ø 100 mm | 3 pcs. | for BGS 9259

4,90 EUR

incl. 19% tax

Dusters | Ø 80 mm | 3 pcs. | for BGS 9259

4,90 EUR

incl. 19% tax

Cordless Caulking Gun | Li-Ion | 10.8 V

387,90 EUR

incl. 19% tax

Repair Staples | U-Type | Ø 0.6 mm | 100 pcs.

16,90 EUR

incl. 19% tax

Repair Staples | U-Type | Ø 0.8 mm | 100 pcs.

16,90 EUR

incl. 19% tax

Repair Staples | V-Type | Ø 0.6 mm | 100 pcs.

16,90 EUR

incl. 19% tax

Sanding Plate with Hook and Loop | Ø 80 mm | for BGS 9259

1,90 EUR

incl. 19% tax

Sanding Plate with Hook and Loop | Ø 100 mm | for BGS 9259

1,90 EUR

incl. 19% tax

Quick Charger for cordless angle Grinder | 230 V | for BGS 9258

40,90 EUR

incl. 19% tax

Quick Charger | for BGS 9259

19,90 EUR

incl. 19% tax

Cordless Polisher | max. 3.000 rpm | 10.8 V | 1.3 Ah

for polishing of small surfaces
electronic speed control, variably adjustable
free-load speed 1.500 – 3.000 rpm
pad diameter Ø 100 mm
shaft thread M10
machine weight: about 820 g
noise level LpA 71 dB(A), KpA 3 dB(A), LwA 82 dB(A), KwA 3 dB(A)
vibration level aH= 2.68 m/s², K= 1.5 m/s²
battery: Li-ion 10.8 V / 1.3 Ah
charger input voltage 100 - 240 V AC, 50 - 60 Hz, 30 W

91,90 EUR

incl. 19% tax

Cordless Angle Grinder | 7.000 rpm | 20 V | 1.5 Ah

176,00 EUR

incl. 19% tax

Automatic Cable Reel | 15 m

with automatic reel stop, can be unlocked by briefly pulling the cable
swivable holder
for wall mounting, with mounting bracket
cable diameter 3 x 1.5 mm²
cable length 15 m + 1 m feed line
voltage suitable for 230 V
dimensions: 295 x 165 x 330 mm
length: 295 mm
width: 165 mm
height: 330 mm
weight: 4.5 kg

85,90 EUR

incl. 19% tax

Soldering Iron | 60 W

8,90 EUR

incl. 19% tax

Digital Electronic Soldering Station

ideal for electricians, schools, car electricians and for development and production
soldering iron holder and cleaning sponge
digital LCD temperature display simultaneously shows the set and actual temperature
compact design
electronic temperature control
reaches set temperature after a short time
secure, low operating voltage on soldering iron
temperature pre-selection by 200°, 300°, 400° buttons, fine adjustment is done via + and - buttons
conversion button for switching the unit from °C to °F
potential equalization socket for protecting sensitive components
error is shown on the display and by an acoustic signal
power supply: 220 to 240 volts / 50 Hz
fuse: T1 A/250 V 50 x 20 mm glass tube
temperature range: 150° C to 450 ° C
soldering iron power: 48 Watt (24 V)
temperature display: LCD display 2x 3 ½ digits
display area: 150 ° C to 450 ° C
accuracy: 5% air pressure: 600 hPa to 1000 hPa
working temperature range: +5 ° C to +40 ° C
relative humidity: 85%
weight approx. 1.8 kg
tool dimensions: 210 x 125 x 135 mm
length: 210 mm
width: 125 mm
height: 135 mm

94,90 EUR

incl. 19% tax

Replacement Battery | Li-Ion | 10.8 V / 1.3 Ah | for BGS 9259

27,90 EUR

incl. 19% tax

Replacement Battery | Li-Ion | 10.8 V

70,90 EUR

incl. 19% tax

Replacement Battery | Ni-Cd | 19.2 V / 2.0 Ah

127,90 EUR

incl. 19% tax

Hot Air Gun | 2000 W

28,90 EUR

incl. 19% tax

Plastic Repair Set

for repairing cracks in plastic parts thicker than 1 mm
suitable for plastic with max. 40% glass fiber content
suitable for plastic bumpers, panels, brackets, etc.
this tools heats up the clamps to a temperature between 100 and 200° C so that they can connect the breaking points and bring back material stability
can also be used for enforcing strongly used areas in plastics
includes: control unit with connecting cable and grip, and following V-shaped repair clamps 0.6 mm, U-shaped repair clamps, Ø 0.6 mm and 0.8 mm
output voltage (3 power levels): L (low) = 0.62 V (4.9 A), M (mid) = 0.66 V (5.2 A), H (high) = 0.68V (5.6 A)
fuse: 500 mA (5 x 20 mm)
maximum rated input power: 12.6 W
power supply frequency: 50 - 60 Hz
power supply voltage (AC): 220 - 240 V

205,90 EUR

incl. 19% tax

Plastic Repair Kit | cordless

for repairing cracks in plastic parts thicker than 1 mm
suitable for plastic with max. 40% glass fiber content
suitable for plastic bumpers, panels, brackets, etc.
this tools heats up the clamps to a temperature between 100 and 200° C so that they can connect the breaking points and bring back material stability
can also be used for enforcing strongly used areas in plastics
includes: heating unit, charger, battery, V-shaped repair clamps 0.6 mm and U-shaped repair clamps 0.6 mm, 0.8 mm

273,90 EUR

incl. 19% tax

Cordless Polisher and Grinder Set | in Tool Tray for Workshop Trolleys | 10.8 V | 8 pcs.

212,90 EUR

incl. 19% tax

Mounting Bracket for Automatic Cable Reel | BGS 3321

4,90 EUR

incl. 19% tax

Multi-Function Jump Starter | 10,800 mAh

emergency battery booster for gasoline engines up to 5.0 l diesel engines and up to 3.0 l engine capacity
5V voltage source for charging USB devices, such as smartphones, tablets, etc. with mini USB socket, micro USB socket, Apple "Lightning" and 30-pin Apple connector
12 / 16 / 19V voltage source for charging laptops, etc.
very handy, powerful device
small dimensions: 160 mm x 71 mm x 31 mm
display for: battery capacity in %voltage and current on 12 / 16 / 19V bus voltage and current on USB bus
battery capacity: 10.800 mAh (37 W/h)
starting current: 200A, top 400A (3s)
USB-output: 5V / 0.1 up to 3A
voltage output: 12V / 16V / 19V
automatic shut-off (approx. 15 sec.)
includes the following accessories:
1 battery booster
1 cable with jump leads
1 USB adaptor charging cable
1 laptop charging cable
8 charging cable adaptors (DC connector)
1 car charging cable
1 charger, 110-240V / 15V(1A)