Brake Fluid Testers

• to test the hydraulic brake pressure directly on the wheel brake cylinder, brake caliper, master cylinder or the hydraulic pump unit on Teves ABS systems with pressure accumulator
• allows to measure pressure differences of both brake circuits

scope of delivery:

• 2 pressure gauges with hose 0 - 255 kg/cm² (0 - 25 Mpa)
• 1 adaptor for Teves ABS with pressure accumulator
• 1 angle adaptor 90 degree
• 1 angle adaptor 45 degree
• 2 fittings 7/16" - 24 mm
• 2 fittings 1/4" - 28 mm
• 2 fittings 3/8" - 24 mm
• 2 fittings 5/16" - 24 mm
• 2 fittings 7/16" - 20 mm
• 2 fittings M7 x 1.0
• 2 fittings M8 x 1.25
• 2 fittings M10 x 1.5
• 2 fittings M10 x 1.0
• 1 thread adaptor

Technical data:

• 4 LED display for showing the condition of the brake fluid
• suitable for brake fluids DOT3, DOT4, DOT5.1
• not suitable for brake fluid DOT5
• warning if battery is empty
• 9-V monoblock battery

Technical data:

• determines the percentage of water in the brake fluid quickly and easily
• immediate indication of the test results via diodes:
  • green =/< 1.5% water content
  • yellow 1.5 - 3% water content
  • red > 3% water content
• suitable for brake fluids DOT3, DOT4, DOT5.1
• non-compatible with brake fluid DOT5
• with automatic power off
• incl. battery

Technical data:

• high accuracy and reliability
• test results are displayed on 4 LEDs
• with protective cap to protect the sensors
• works on a 1.5 V AAA battery (included)
• easy to use, switch on, insert sensors into the brake fluid, read result
• suitable for brake fluids DOT3, DOT4, DOT5.1
• not suitable for brake fluid DOT5
• diameter: approx. 20 mm

Technical data:

• for measuring the boiling point of brake fluids
• boiling point temperature is used to accurately determine the amount of water in brake fluids
• also suitable for measuring the temperature of other liquids when using a thermocouple
• suitable for cars, motorcycles and pickup trucks with brake fluids DOT 3, DOT 4 or DOT 5.1
• power: 12 V automotive battery
• testing current: 5 - 7 A
• working environment: 0 - 50 °C
• boiling point measuring range: </= 320 °C (</= 608 °F)
• boiling point measuring accuracy: +/- 5%
• temperature measuring range: -60 °C to 500 °C (-76 °F to 932 °F)
• temperature accuracy: -20 to 500 °C +/- (1%+3digits)

Technical data:

• for pressure measurement on brake systems with and without ABS
• facilitates troubleshooting of hydraulic brake systems
• for checking brake pressure control valves, brake force regulators, pre-pressure valves and for determining the pressure difference between left and right / front and rear brakes

scope of delivery:

• 2 pressure gauges 0 200 kg/cm² (0 3000 psi)
• 2 adaptor M10 x 1.5
• 2 adaptor M10 x 1.0
• 2 adaptor M7 x 1.0
• 2 adaptor M8 x 1.25
• 2 adaptor 3/8" x 24UNF
• 2 adaptor 1/4" x 28UNF
• 2 adaptor 7/16" x 24UNF
• 2 adaptor 7/16" x 20UNF
• 2 adaptor 5/16" x 24UNF
• 2 adaptor M8 x 1.0
• 2 adaptor M10 x 1.0
• 2 adaptor M10 x 1.25
• 2 adaptor M6 x 1.0
• 1 connecting pipe
• 1 angle connecting piece M14 x 1.5
• 1 connecting pipe M8 x 1.0
• 2 connecting piece 45°
• 2 connecting piece 90°

Technical data: