Wheel BeaRing & Rubber Bushes

• disassembly / assembly of the ball joints in rear wheel carrier, suitable for the following BMW models:
  • 5-series E39 / E60 / E61 / E70
  • 6-series E63 / E64
  • 7-series E38 / E65 / E66 / E67
  • 8-series E52
    
    
• disassembly / assembly of the ball joints and rubber bearings in the trailing arm, suitable for the following BMW models:
  • 3-series E36 / E46 / E83
  • 5-series E39 / E60 / E61 / E70
  • 6-series E63 / E64
  • 7-series E38 / E65 / E66 / E67
  • 8-series E31 / E52
  • Z4-models E85 / E86
    
    
• disassembly / assembly of the rubber bush in rear axle carrier (bottom), rear transmission screw, suitable for the following BMW models:
  • 3-series E36 / E46 / E83
  • 8-series E31
  • Z4-models E85 / E86
    
    
• disassembly / assembly of the rubber bearings in the rear transmission suspension front and rear, suitable for the following BMW models:
  • 1-series E81 / E87
  • 3-series E36 / E46 / E83 / E90 / E91 / E92 / E93
  • 5-series E60 / E61
  • 6-series E63 / E64
  • 7-series E38 / E65 / E66 / E67
  • 8-series E31
  • Z4-models E85 / E86
  • MINI Cooper S R53

scope of delivery:

• spindle M12 x 1.5 with bearing nut, length: 225 mm
• 24 mm hexagon drive socket
• disc, 48, 55, 65 mm
• bell, inner Ø: 47 mm, outer Ø: 55 mm, length: 72 mm
• bell, inner Ø: 50 mm, outer Ø: 64 mm, length: 70 mm
• bell, stepped, inner Ø: 36, 40 mm, outer Ø: 45 mm, length: 30 mm
• bell, stepped, inner Ø: 47, 53 mm, outer Ø: 58 mm, length: 43 mm
• bell, stepped, inner Ø: 47, 53 mm, outer Ø: 58 mm, length: 61 mm
• bell, inner Ø: 32 mm, outer Ø: 46 mm, length: 26 mm
• bell, inner Ø: 46 mm, outer Ø: 55 mm, length: 32 mm
• bell, inner Ø: 47 mm, outer Ø: 51 mm, length: 35 mm
• bell, flattened, inner Ø: 47 mm, outer Ø: 55 mm, length: 32 mm
• disc, stepped, flattened, inner Ø: 57 mm, outer Ø: 70 mm, thickness: 13 mm
• sleeve, 1/3 open, inner Ø: 59 mm, outer Ø: 70 mm, length: 55 mm

Technical data:

Gross weight: 6820 g

• for non-damage mounting of bearings and sealing rings
• suitable for most bearings

scope of delivery:

• 33 nylon and 3 metal mounting sleeves
• pressure piece sizes: 10 - 26 mm / 10 - 30 mm / 10 - 35 mm / 12 - 28 mm / 12 - 32 mm / 12 - 37 mm / 15 - 32 mm / 15 - 35 mm / 15 - 42 mm / 17 - 35 mm / 17 - 40 mm / 17 - 47 mm / 20 - 42 mm / 20 - 47 mm / 20 - 52 mm / 25 - 47 mm / 25 - 52 mm / 25 - 62 mm / 30 - 55 mm / 30 - 62 mm / 30 - 72 mm / 35 - 62 mm / 35 - 72 mm / 35 - 82 mm / 40 - 68 mm / 40 - 80 mm / 40 - 90 mm / 45 - 75 mm / 45 - 85 mm / 50 - 80 mm / 50 - 90 mm
• pressure disk sizes 45 - 100 mm / 50 - 110 mm

Technical data:

Gross weight: 4330 g

• facilitates assembly and disassembly of front wheel hub-bearing unit

suitable for the following models:

• Ford Focus 2 as of 2004, C-Max as of 2003
• Volvo C30 as of 2006, C70 Cabriolet as of 2006, S40 as of 2004, V50 as of 2004
• Mazda 3 (BK) 1.4 / 1.6 /1.6 Turbo as of 2003

scope of delivery:

• 1 pressure plate
• 4 pressure bolts
• 2 stop screws
• 1 pair of dismounting shells
• 1 disassembly pressure plate
• 1 pair of mounting shells
• 1 assembly pressure piece
• 1 high-strength ball bearing fitted spindle

Technical data:

Wrench size: 22 mm
Length: 240 mm
Gross weight: 10650 g

• for renewing the rear control arm bushing
• suitable for all Mercedes-Benz models of the E-class W210

Technical data:

Gross weight: 5650 g

• suitable for mounting bearings and sealing rings
• particularly useful when used with a hydraulic press

scope of delivery:

• 17 mounting pads Ø 70 to 150 mm (5 mm steps)
• 273 mm metal handle for use with a hammer

Technical data:

Gross weight: 20000 g
Material: Carbon steel

• suitable for bearing and bush driver set (BGS 8736)

Technical data:

Gross weight: 1000 g

• for replacing wheel bearings on VAG models
• suitable for the following models: Audi A3 (8L), A4 (B5), A4 Quattro (B6) rear axle, Audi A6 (4A, 4B), A8 (4D, 4E), TT (8N, 8J), VW Polo (6N), Golf (II , Ill, IV), Passat, Sharan, T4
• includes all tools for disassembly and assembly of wheel bearings

Technical data:

Gross weight: 13600 g

• for easy and gentle replacing of rear axle bushes on BMW models E36, E46, E85
• consists of disassembly and assembly pressure pieces, ball bearings, high-strength spindle M12 x 1.5

Technical data:

Gross weight: 5340 g

• for replacement of bushes on wishbone / trailing arms, wheel bearing housing, lower wishbone downside / inside
• allows replacement of silent bearings on the vehicle, when installed
• applicable in conjunction with mechanical spindle

suitable for the following VAG models:

• VW: Golf 5 Plus / Variant / 4-Motion manufactured in 2005-2012, Jetta / Syncro Bj. 2006-2012, Scirocco manufactured in 2009-2012, Beetle manufactured starting from 2012, Eos manufactured in 2006-2012
• Seat: Altea as of 2004-2012, Leon as of 2006-2012, Toledo as of 2005-2009
• Audi: A3 / S3 as of 2004-2012, TT / TTS Coupe/Roadster as of 2007-2012

scope of delivery:

• spherical washers
• adaptor ring
• assembly and disassembly pressure pieces
• assembly centering discs
• centering sleeves and spacer rings
• drive spindle M12 x 1.5 incl. pressure nut

Technical data:

Gross weight: 4130 g

• for renewing the plastic and rubber bushes on rear axle when installed
• enables renewal on the vehicle, when installed

suitable for the following VAG models:

• Audi A3 (Bj. 1996 - 2003)
• Seat Leon (Bj. 1999 - 2006)
• Seat Toledo (Bj. 1999 - 2006)
• Škoda Oktavia (Bj. 1996 - 2013)
• VW Golf 4 (Bj. 1997 - 2006)
• VW Bora (Bj. 1998 - 2005)
• VW New Beetle (Bj. 1998 - 2010)

scope of delivery:

• plungers: Ø 68.7 - 76.6 - 83.8 - 90 - 90.3 - 96.3 - 97.9 mm
• ring Ø 40 mm
• drive spindle M12 x 1.5 with spindle nut

Technical data:

Gross weight: 5020 g

• for renewing the rear axle bearing
• can be used directly on car, in installed condition

scope of delivery:

• centering plate with disk and spring
• 2 pressure disks
• adaptor ring
• spindle with spindle nut M14 x 2

Technical data:

Gross weight: 3500 g

• for replacing the trailing arm bushings and trailing arm in wheel carrier bushing
• suitable for BMW models 1 and 3 (2004 - 2012) series: E81 / E82 / E83 / E85 / E86 / E87 / E88 / F20 / E90 / E91 / E92 / E93

scope of delivery:

• split bush compressor to be used as OEM 334450
• camber arm mounting extraction / insertion tool to be used as OEM 334460
• trailing arm mounting extraction / insertion tool to be used as OEM 334480

Technical data:

To be used as OEM1: 33 4 450 | 33 4 460 | 33 4 480 BMW
Gross weight: 4000 g

• for disassembly and assembly of the front control arm bush without removing the control arm
• suitable for MINI One, Cooper, Cooper S (2001),R50 / R53 Chassis W10 / W11 / W17
• to be used for BMW OE 31126757551

scope of delivery:

• spindle M16 x 2, M12 x 1.75
• spindle nut M16
• 24 mm hexagon drive socket
• ball bearing 51103
• sleeve, inner Ø: 67 mm, outer Ø: 79 mm, length: 75 mm
• disc, inner Ø: 17 mm, outer Ø: 78 mm
• thrust washer, flattened, internal thread M12 x 1.75, outside diameter: 77 mm
• thrust washer, flattened, inner Ø 68 mm, outer Ø: 77 mm
• thrust washer, internal thread M12 x 1.75, outer Ø: 65 mm

Technical data:

Gross weight: 3080 g

Technical data:

Gross weight: 460 g

• for removal and installing of the rear axle carrier rubber bushings
• allows renewing of the bushes without removing of the carrier
• suitable for BMW X5 E53

Technical data:

Gross weight: 5570 g

• for removing / installation of the rear trailing arm bush
• suitable for Ford Fiesta / Ka (from 1996)
• can be used directly on vehicle, without removing the trailing arm

scope of delivery:

• spindle
• spindle nut
• pushing cup
• reception cup
• insertion cup
• spindle nut with bearing

Technical data:

Gross weight: 1840 g

• for disassembly and assembly of the rear trailing arm bushes
• removal and installation can be done directly on the car

suitable for following models:

• Ford Focus MKI (as of 1998 - 2007), MKII (as of 2007 - 2012), Kuga (as of 2008 - 2012), C-Max (as of 2003 - 2007)
• Mazda BK (as of. 2005 - 2009), CR (as of 2005 - 2010)
• Volvo V50 (as of 2004 - 2012), S40 (as of 2003 - 2012)

Technical data:

Gross weight: 5064 g

• for removing and installing the rear upper and lower bushes on trailing arm suspensions

suitable for following models:

• Opel (Vauxhall) Vectra 1.6, 1.8, 2.0 (1995-) and 2.5 (1996-)

• can be used directly on car, without removing the trailing arm
• nut with thrust bearing

Technical data:

Gross weight: 1200 g

• for removing and installing of 62 - 66 - 72 & 85 mm wheel bearing hub units on VAG vehicles

suitable for following models:

• Audi A2
• Volkswagen Lupo, Polo, Fox, Multivan, T6, Transporter, Touareg
• Skoda Roomster
• Seat Arosa, Cordoba, Ibiza

scope of delivery:

• 1 spindle, high-strength, with ball-bearing
• 1 spindle nut
• 3 pairs of mounting shells
• 3 pairs of dismounting shells
• 2 pressure plates
• 6 pressure discs
• 10 pressure bolts
• 4 screws for shells
• 1 hexagon key wrench

Technical data:

Gross weight: 22820 g

Technical data:

Gross weight: 3736 g

Gross weight: 22080 g

Gross weight: 22080 g

Gross weight: 1964 g

Gross weight: 370 g

• facilitates assembly and disassembly of wheel hub-bearing unit

suitable for the following Opel models:

• Ford Galaxy, S-Max
• Land Rover Freelander 2
• Volvo S80, V70, XC60, XC70

scope of delivery:

• high-strength ball bearing fitted spindle
• pressure plate with 8 holes
• 4 pressure bolts, 8 mm
• 4 pressure bolts, 12 mm
• 1 pair of divided dismantling shells
• 1 dismantling plate
• 1 pair of divided mounting shells
• 1 mounting plate

Technical data:

Gross weight: 10500 g

Gross weight: 1752 g

• enables dismantling and assembly of the rear axle silent block directly on the vehicle without
  removal of the rear axle

suitable for the following Opel / Vauxhall models:

• Astra H (2004-2014), Meriva B (2010-), Zafira B (2005-2014)
• can be used on silent blocks with the following OE part numbers:
  
  • Opel: 5402637, 0402952, 402952
  • Vauxhall: 13110418, 13267215
  • GM: 13110418, 13267215
  • AUTOMEGA: 110152710
  • JP Group: 1250101100
  • Monroe: L24850
  • Swag: 40930604
  • Triscan: 850024850

scope of delivery:

• mounting pressure piece
• mounting plate
• removing bell
• removing pressure piece
• spindle with spindle nut, 17 mm, length: 305 mm, M10 x 2.0

Technical data:

To be used as OEM5: 1250101100 JP Group
To be used as OEM3: 13110418 | 13267215 General Motors
To be used as OEM4: 110152710 AutoMega
To be used as OEM6: L24850 Monroe
To be used as OEM8: 850024850 Triscan
To be used as OEM2: 13110418 | 13267215 Vauxhall
To be used as OEM7: 40930604 SWAG
To be used as OEM1: 5402637 | 0402952 | 402952 Opel
Gross weight: 5400 g

• with spindle nut

Technical data:

Packaging suitable for wall hanging: No
Wrench size: 17 mm
Gross weight: 394 g
Length: 305 mm

• for replacing the rear trailing arm silent bush (Ø 60 mm) directly on vehicle, dismantling of the trailing arm is not required
• no need to replace the complete trailing arm

suitable for the following models:

• Ford Focus 1998 - 2004
• Ford Focus II starting from 2004
• Ford C-Max 2003 - 2007
•  Ford Kuga starting from 2008
• Mazda 3 starting from 2003
• Mazda 5 starting from 2005
• Volvo C30 starting from 2006
• Volvo S40 II starting from 2004
• Volvo V50 starting from 2004

Technical data:

Gross weight: 8600 g

• for quick and easy cleaning of the contact surface from rust and dirt
• for use on wheel hubs and brake discs and wheel hubs with stud bolts, e. g. on Ford, Porsche, Volvo, etc.
• reduces sparking
• low dust development due to open-pore abrasive and cup-shaped sanding pad
• wear-resistant - maximum service life (approx. 50 vehicles per wheel)
• can be used with drills and cordless screwdrivers (maximum speed 3.000 rpm)

scope of delivery:

• 1 grinding wheel with round drive shaft Ø 6.3 mm (1/4 ") for electric drills / adaptors
• 3 replacement hook and loop pads with self-adhesive back
• 5 coarse-grained cleaning discs, outer diameter 40 mm
• 5 fine-grained cleaning discs, outer diameter 40 mm, inner diameter 16.5 mm

Technical data:

Gross weight: 196 g
Packaging suitable for wall hanging: Yes